This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
battery to starter question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Posts: 20
- Joined: Sat May 29, 2021 6:03 pm
- Zip Code: 33952
battery to starter question
The 49' I own was converted to 12 volt, I'm assuming since I'm rebuilding it that the new cable runs from battery positive to starter now? Also is #2 AWG ok or some sites say #1, Thanks!
-
- Team Cub Mentor
- Posts: 20369
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: battery to starter question
2 AWG will be fine. I used a battery cable from the auto parts store when I converted to 12 volts. Or, if the old cable is in good condition, use it.
I have an excuse. CRS.
-
- 501 Club
- Posts: 1118
- Joined: Sun Nov 10, 2019 5:14 pm
- Zip Code: 29848
- Tractors Owned: Yanmar YM2000
Yanmar YM186 (non running)
1952 Farmall Cub - Circle of Safety: Y
- Location: Greenwood County SC
Re: battery to starter question
12v won't need a cable as thick as 6v. So like said if your current is in good condition it's fine to use it.
Who is online
Users browsing this forum: Tom Clark and 21 guests