Replace Bolster (maybe)
Posted: Thu Jul 22, 2021 8:09 am
just wondering if I can get a list of parts I'll need if I replace the bolster on my cub....
Paul
Paul
Farmall Cub
The "International" House of Cubs (est. 5/10/1999)
https://farmallcub.com/phpBB2/
Replace Bolster (maybe)
Page 1 of 1
Re: Replace Bolster (maybe)
Posted: Thu Jul 22, 2021 1:28 pm
Seems like you have the awesome luck of needing big/heavy parts for that cub!!! You couldn't just need a set of points, or a gasket???!!
Re: Replace Bolster (maybe)
Posted: Thu Jul 22, 2021 1:46 pm
LOL , I think I'm going to call it the red devil
Re: Replace Bolster (maybe)
Posted: Thu Jul 22, 2021 2:20 pm
The steering gaskets and bushing seals, and the radiator gaskets pulse and " while the hood is off" parts you need. Rivets to change the sn plate.
I would get the bolster from JP tractor ( bee below) They sandblast and inspect them. I bought a used one and the first thing I had to do is get it blasted. You also should use Glyptal on the "wet" surfaces inside.
I would get the bolster from JP tractor ( bee below) They sandblast and inspect them. I bought a used one and the first thing I had to do is get it blasted. You also should use Glyptal on the "wet" surfaces inside.