Wagner loader

[Pwalker21]

So I’m a little confused then because this loader only has 1 hydraulic line coming from the bypass block on the bottom feeding into the inlet side of the valve. Nothing come back from the valve to the hydraulics on the cub. It’s a Gressen Valve idk of that makes and difference. I’m trying to upload photos but keeps saying error file to big.

[Pwalker21]

http://farmallcub.comhttp://farmallcub. ... 49fc7ed57b

[welderrx]

The pressure feed comes out of the lines from the pump to the touch control there is a small pipe plug right at the touch control , that is where you tap in for pressure.TJ

[Jim Becker]

Are you sure the previous owner actually HAD IT WORKING on his tractor? We may be seeing why he decided to sell it.

[Pwalker21]

He actually bought the tractor with the loader on it, but he only needed it for the other implements. It was not hooked up. Looks like the guy he bought it from was in the middle of working on it and before he passed away . I think I need to reroute the reservoir line to the cub hydraulic fill and where he had that hooked up to, to make that the return from the valve. Because as it sits right now he has the pressure line to the inlet of the valve.

[Matt Kirsch]

Also Ive heard that the loaders and snow plows can cause stress cracks on the engine block. Any ideas on how to keep that from happening?

The biggest contributor to broken tractors is operators driving them like battering rams. If you're going to slam into things, something will inevitably break.