IH c22 mower pitman arm is # 451392R1 "which I bought" and the IH 22 mower with "special" pitman arm (the one with ball fitting) is # 453467R91. I can't find a replacement part with numbers that match 453467R91. Is there someplace to get a spic sheet/ data sheet so I can make one or at least be able to check the spics before I buy the wrong one again.
Thanks
Richard
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
pitman arms
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Posts: 13
- Joined: Mon Oct 05, 2020 5:20 am
- Zip Code: 02879
- Tractors Owned: 53 Cub
54 Fast hitch
Fast hitch plow
Fast hitch disk harrow
Sickle bar
pitman arms
A job worth doing, is a job worth doing right
-
- Team Cub
- Posts: 11859
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: pitman arms
If you click on "quick links" (upper left of page), then on "PDF Manuals", then on "Farmall Cub", then on "attachments", then on "mowers", you'll find a manual with parts. 451392R1 is the pitman stick. I don't see 453467R91 anywhere. Are you looking for the strap ends that hook on the ball or the bearing/bushing end? I don't think you'll find specs anywhere. A "wanted" in the Vine subforum may turn up a used one.
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: pitman arms
451392R1 is the wooden pitman stick. 453467R91 is the complete pitman assembly with the ball bearing, including 451392R1. The assembly part number advanced as far as 453467R94. If you google the later part number, you will probably find one or two new ones out there. The complete assembly is fairly pricy. So unless you really need the whole assembly, you will probably be better off to get the individual parts. You can probably find a used one as Bob suggested.
Who is online
Users browsing this forum: Majestic-12 [Bot] and 60 guests