Hydraulic Valve Removal Tip

[lyle11]

While disassembling the Hydraulic Block, it can be difficult to remove the valves. For the Control Valve Inner Bushing and the Safety Valve Inner Bushing, I cut the head off a toothbrush and shaved a little material off the end. I pushed the plastic end into the hole in the bushing. Then I tapped it gently with a hammer to seat it snugly. In both cases the bushing pulled right out. This might work for you.

8D16FB47-7A19-486C-839E-D722C08E072F.jpeg (20.34 KiB) Viewed 115 times

[Dale Finch]

Good one, lyle11...very innovative!! Congrats!