Hey folks,
In the process of restoring a 22 so I can mow my orchard. The one I have is missing the whole Pitman arm. I've found the wooden arms lots of places, but cant seem to find the parts for either end (the important bits...) Anyone have one for sale or know of a source for replacement parts? Help is appreciated.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Farmall Cub 22 restoration
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
LU&E42
- 5+ Years
- Posts: 15
- Joined: Tue Jan 08, 2019 5:21 pm
- Zip Code: 43844
-
Robert Cool
- Posts: 32
- Joined: Tue Aug 04, 2020 10:04 am
- Zip Code: 28645
- Tractors Owned: 1971International Cub
- Location: Western NC
Re: Farmall Cub 22 restoration
Try posting a want add in the vine. I was able to get the pitman end I needed from a member of the forum.
-
Glen
- 10+ Years
- Posts: 6146
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Re: Farmall Cub 22 restoration
Hi,
Below is a post from 2 days ago with info about the pitman.
My 2 posts in the post show the 2 different pitman bearings.
There is the plain bearing pitman, and the ball bearing pitman.
The ball bearing was more deluxe, I guess.
You can disregard the info about the rear pulley in the post.
viewtopic.php?f=1&t=108656
If you can't find a used pitman assembly, I think Webb Cutting Components, that I showed in the post has the parts to build a complete pitman.
Case IH might have the parts too, I don't know.
Below is a post from 2 days ago with info about the pitman.
My 2 posts in the post show the 2 different pitman bearings.
There is the plain bearing pitman, and the ball bearing pitman.
The ball bearing was more deluxe, I guess.
You can disregard the info about the rear pulley in the post.
viewtopic.php?f=1&t=108656
If you can't find a used pitman assembly, I think Webb Cutting Components, that I showed in the post has the parts to build a complete pitman.
Case IH might have the parts too, I don't know.
Who is online
Users browsing this forum: Crimson Tim, Glen and 52 guests
