I've dismantled the blade assembly in order to clean and paint it and have run into something odd. If you look at the image, where the arrows point there were single flat washers in between there for all 4 bolts. They're not listed in the parts manual and I suspect a PO put them in there for ?? Has anyone run into or seen this before?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
54 push blade oddity question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- radioguy41
- 5+ Years
- Posts: 1257
- Joined: Sun Jun 18, 2017 10:46 am
- Zip Code: 18235
- Tractors Owned: -
1957 Red IH Lo-Boy
1980 Red IH Cub Cadet 782
1993 Craftsman LT4000 - Circle of Safety: Y
- Location: Lehighton, PA
- Don B.
- 5+ Years
- Posts: 414
- Joined: Thu Jul 02, 2015 12:02 pm
- Zip Code: 25314
- Tractors Owned: 1948 Cub (looks pretty)
1951 Cub (does the work)
1952 Cub (sold) - Circle of Safety: Y
- Location: Charleston, WV
Re: 54 push blade oddity question
My blade doesn't have any washers there. In fact, mine is a little too sloppy there due to wear. I have considered adding some kind of shim to tighten it up a little.
- Bill V in Md
- 10+ Years
- Posts: 1124
- Joined: Sun Feb 02, 2003 6:51 pm
- Zip Code: 21228
- Tractors Owned: 1948 Farmall Cub
LT1045 Cub Cadet - Circle of Safety: Y
- Location: MD, Catonsville
- Contact:
Re: 54 push blade oddity question
My blade has four 1/2” lock washers at that location. They are not shown on the diagram, but are noted on the parts list (Manual page 5, Rev 1).
Bill VanHooser
Cub 54 Blade, Cub 193 Moldboard Plow, Cub 28A Disc Harrow
Cub 54 Blade, Cub 193 Moldboard Plow, Cub 28A Disc Harrow
- radioguy41
- 5+ Years
- Posts: 1257
- Joined: Sun Jun 18, 2017 10:46 am
- Zip Code: 18235
- Tractors Owned: -
1957 Red IH Lo-Boy
1980 Red IH Cub Cadet 782
1993 Craftsman LT4000 - Circle of Safety: Y
- Location: Lehighton, PA
Re: 54 push blade oddity question
Yes mine has the lock washers but these are flat washers in between the arms (#3) and the guides (#4).
KB3WBB
Who is online
Users browsing this forum: ricky racer and 54 guests