This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
C3 mower
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 5214
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: C3 mower
on what model?
-
- 5+ Years
- Posts: 1624
- Joined: Thu Mar 09, 2017 4:06 pm
- Zip Code: 06405
- Tractors Owned: 1957 Cub
1951 Super C
1966 IH 504 Hi-Clear
1968 JD 3020
1949 JD B
1949 Ford 8N
1955 Ferguson TO-35 - Location: Branford, CT
Re: C3 mower
Ummm, I don't know, Tim...Pretty sure it is a Danco....how would I know? John
-
- 10+ Years
- Posts: 2428
- Joined: Sat Sep 07, 2013 3:45 pm
- Zip Code: 48158
- Tractors Owned: ~
1958 International Cub LoBoy
1947 Farmall H
1946 Farmall B
1953 Willys CJ3B
2022 Massey Ferguson GC1723E Subcompact
Cub Loboy L-54 Leveling and Grader Blade - Circle of Safety: Y
- Location: Manchester, MI
Re: C3 mower
Cub or LoBoy? You could always route a rope and measure its length. That would get you close.
Jim
-
- 10+ Years
- Posts: 5214
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: C3 mower
that is the question, is the C3 on a lowboy or a regular cub, if you have a regular cub with 4" mule drive pulleys B110, if you have the 8" mule drive pulley use B108, for non fast hitch models
-
- 5+ Years
- Posts: 1624
- Joined: Thu Mar 09, 2017 4:06 pm
- Zip Code: 06405
- Tractors Owned: 1957 Cub
1951 Super C
1966 IH 504 Hi-Clear
1968 JD 3020
1949 JD B
1949 Ford 8N
1955 Ferguson TO-35 - Location: Branford, CT
Re: C3 mower
It is an F cub and I currently has the 8" pulley with a belt that works fine...but the mule pulleys are "bottomed out" at horizontal. If I switch to my 6.5" pulley i imagine I will need a shorter belt. Just wondered if it is standard.
-
- 10+ Years
- Posts: 4113
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: C3 mower
3 belts makes it an old danco. All Woods have only 1 belt.
-
- 5+ Years
- Posts: 47
- Joined: Fri Mar 02, 2018 4:13 pm
- Zip Code: 76661
- eBay ID: kenbtexas
- Tractors Owned: farmall 300.. and 2 CUBs !!
- Circle of Safety: Y
- Location: Waco, Texas
Re: C3 mower
so I take it that this is also a danco ??
Still learning
what is that hook hanging down to the left ??
Thanks
Ken
Still learning
what is that hook hanging down to the left ??
Thanks
Ken
-
- 10+ Years
- Posts: 6684
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: C3 mower
That's the front battery box bolt. It's just hanging down into view. If run like that, the nut can vibrate off and you can lose the bolt!! BTDT!
-
- 5+ Years
- Posts: 47
- Joined: Fri Mar 02, 2018 4:13 pm
- Zip Code: 76661
- eBay ID: kenbtexas
- Tractors Owned: farmall 300.. and 2 CUBs !!
- Circle of Safety: Y
- Location: Waco, Texas
Re: C3 mower
battery box bolt..
I would have never thought of that !!!
thanks
I would have never thought of that !!!
thanks
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Torque setting for mower blade bolts on a c-3 mower? Attachment(s)
by jackwest » Mon Oct 03, 2022 10:25 pm » in Farmall Cub - 7
- 262
-
by Barnyard
Wed Oct 05, 2022 1:58 pm
-
-
- 1
- 109
-
by Glen
Thu Mar 23, 2023 3:45 pm
-
- 4
- 302
-
by Vern007
Thu May 05, 2022 7:44 pm
-
- 11
- 850
-
by ScottyD'sdad
Sat May 07, 2022 6:28 pm
-
- 5
- 383
-
by Stanton
Wed Apr 06, 2022 9:21 am
Who is online
Users browsing this forum: Garvin Gatewood and 9 guests