I have an International C3 mower that was used under a Super A. The mule drive was used with a SA with a fast hitch. I know the mule drive is specific to the SA but is the C3 deck used on the Cub and Lo-Boy or even the numbered cubs?
I’m looking to put this up and I wish to represent it as accurately as possible.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
International C3 mower
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
Lt.Mike
- 10+ Years
- Posts: 2499
- Joined: Sun Feb 17, 2008 2:38 am
- Zip Code: 07727
- Tractors Owned: 1 -'58 International Cub Lo-Boy
2 - '46 International A's
2 - '52 Farmall Cubs
1 - '53 Farmall Super A
1 - ‘41 Ford 9N with a ‘49 8N Engine
1 - ‘48 (5641) Allis Chalmers G - Location: Farmingdale NJ
International C3 mower
Quote by Gary Pickeral I like
"If it can cast a shadow, it can be restored"
"If it can cast a shadow, it can be restored"
-
Bermuda Ken
- 10+ Years
- Posts: 682
- Joined: Fri Feb 07, 2003 8:43 am
- Zip Code: 53536
- Tractors Owned: Tractors owned past/present:
Farmall.....F-1206, F-806 sn#501.
Cub Cadet...Original(s), 122, Spirit of 76, 1200, 1250, 1450, 782, 782 Diesel (2), 984, 982, CADET 000 LT Prototype. - Circle of Safety: Y
- Location: Wisconsin.......The Badger State
- Contact:
Re: International C3 mower
Yes...the C-3 mower was used on the Cub and Cub Loboys both...
Cub Cadets....Engineered for people who know better!
-
tst
- 10+ Years
- Posts: 5214
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: International C3 mower
if you sell it for a cub it would not be worth as much without a pulley or mule drive to run it
-
outdoors4evr
- 10+ Years
- Posts: 2791
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: International C3 mower
Won't you have to put a twist in the belt to run it on a cub or loboy?
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
jim turner
- 10+ Years
- Posts: 1750
- Joined: Sun Feb 02, 2003 1:09 pm
- Zip Code: 64784
- Circle of Safety: Y
- Location: Mo, Sheldon
- Contact:
Re: International C3 mower
yes you will have to twist the belt for a Cub, it has been my experience it will take a really good Cub to run a C3 I put mine on a A and it handles it much better
Jim Turner
-
tst
- 10+ Years
- Posts: 5214
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: International C3 mower
A C3 does not require a twist like the IH C2 or woods, I have 3 of them on cubs
-
jim turner
- 10+ Years
- Posts: 1750
- Joined: Sun Feb 02, 2003 1:09 pm
- Zip Code: 64784
- Circle of Safety: Y
- Location: Mo, Sheldon
- Contact:
Re: International C3 mower
TST maybe that is why my Cub wouldn't mow I did twist the belt
Jim Turner
-
tst
- 10+ Years
- Posts: 5214
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: International C3 mower
that made the blades run backwards
-
Denny Clayton
- 10+ Years
- Posts: 4565
- Joined: Wed Feb 05, 2003 1:18 pm
- Zip Code: 45365
- Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
- Circle of Safety: Y
- Location: OH, Sidney
Re: International C3 mower
jim turner wrote:TST maybe that is why my Cub wouldn't mow I did twist the belt
Jim, you’ll just have to sharpen the backside, too.'61 Lo-Boy
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty" (CubTug winner 2007 & 2009)
Member of Ohio Chapter 6
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty" (CubTug winner 2007 & 2009)
Member of Ohio Chapter 6
-
jim turner
- 10+ Years
- Posts: 1750
- Joined: Sun Feb 02, 2003 1:09 pm
- Zip Code: 64784
- Circle of Safety: Y
- Location: Mo, Sheldon
- Contact:
-
NJ Farmer
- 10+ Years
- Posts: 357
- Joined: Fri Feb 04, 2005 7:20 pm
- Zip Code: 08876
- Tractors Owned: 1953 F-Cub
1957 F-Cub
1956 Lo-Boy
1971 Cub Cadet 149
1976 Cub Cadet 1200 - Circle of Safety: Y
Re: International C3 mower
I think some people are abit confused with the Danco (International) C-3 set up. The correct method is to have 3 belts with NO twist. However I have seen some Cubs with C-3's with only one belt which requires a twist in the belt similiar to the Woods 59 setup.
Again the correct setup on a Farmall Cub with a Danco C3 is three belts. Also the correct setting of the mule drive pulley is important to guide the belts to the rear center pulley.
NJ Farmer
Again the correct setup on a Farmall Cub with a Danco C3 is three belts. Also the correct setting of the mule drive pulley is important to guide the belts to the rear center pulley.
NJ Farmer
-
welderrx
- 10+ Years
- Posts: 202
- Joined: Fri Mar 07, 2003 8:17 pm
- Zip Code: 00000
- Tractors Owned: 52 Cub Fast Hitch 68 Lo-Boy 66 Cub Cadet 125 100 Manure Spreader Wagner Loader
- Circle of Safety: Y
- Location: Hunterdon County N.J.
Re: International C3 mower
All I can tell you with the C-3 on my Lo-Boy is keep it greased and the blades sharp and it will work so much better. TJ
Blue Mountain Antique Gas and Steam Engine Association
-
jim turner
- 10+ Years
- Posts: 1750
- Joined: Sun Feb 02, 2003 1:09 pm
- Zip Code: 64784
- Circle of Safety: Y
- Location: Mo, Sheldon
- Contact:
-
Lt.Mike
- 10+ Years
- Posts: 2499
- Joined: Sun Feb 17, 2008 2:38 am
- Zip Code: 07727
- Tractors Owned: 1 -'58 International Cub Lo-Boy
2 - '46 International A's
2 - '52 Farmall Cubs
1 - '53 Farmall Super A
1 - ‘41 Ford 9N with a ‘49 8N Engine
1 - ‘48 (5641) Allis Chalmers G - Location: Farmingdale NJ
Re: International C3 mower
The belt this one came with is round.
Quote by Gary Pickeral I like
"If it can cast a shadow, it can be restored"
"If it can cast a shadow, it can be restored"
-
NJ Farmer
- 10+ Years
- Posts: 357
- Joined: Fri Feb 04, 2005 7:20 pm
- Zip Code: 08876
- Tractors Owned: 1953 F-Cub
1957 F-Cub
1956 Lo-Boy
1971 Cub Cadet 149
1976 Cub Cadet 1200 - Circle of Safety: Y
Re: International C3 mower
You say the belt it came with is round......what is it a rope?!?!?
NJ Farmer
NJ Farmer
Who is online
Users browsing this forum: Glen and 79 guests
