This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
C-3 Mower
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
ajhbike
- 5+ Years
- Posts: 1623
- Joined: Thu Mar 09, 2017 4:06 pm
- Zip Code: 06405
- Tractors Owned: 1957 Cub
1951 Super C
1966 IH 504 Hi-Clear
1968 JD 3020
1949 JD B
1949 Ford 8N
1955 Ferguson TO-35 - Location: Branford, CT
C-3 Mower
What is the correct diameter of the PTO pulley on the C-3 please? The one I have has to be around 8". Just got the cub (non FH) and mower a few months ago and everything works well, but the pulley is so big that I cannot put on the rear rockshaft rod and lift mechanism.
-
tst
- 10+ Years
- Posts: 5214
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: C-3 Mower
they came with a 8" pulley, yes it will hit the rockshaft and it needs to be spaced to clear or take the rockshaft off, I find the C3 works better and easier on the tractor load using the woods type 6.5" pulley
-
ajhbike
- 5+ Years
- Posts: 1623
- Joined: Thu Mar 09, 2017 4:06 pm
- Zip Code: 06405
- Tractors Owned: 1957 Cub
1951 Super C
1966 IH 504 Hi-Clear
1968 JD 3020
1949 JD B
1949 Ford 8N
1955 Ferguson TO-35 - Location: Branford, CT
Re: C-3 Mower
It looks like it has to be spaced at least 3/4" to clear the big pulley...probably not worth fooling with. I'll store the rockshaft for down the road I guess. Thanks Tim...I hope you are healed and back in action. John
Who is online
Users browsing this forum: No registered users and 52 guests
