This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Hand lift control lever
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 1616
- Joined: Thu Mar 09, 2017 4:06 pm
- Zip Code: 06405
- Tractors Owned: 1957 Cub
1951 Super C
1966 IH 504 Hi-Clear
1968 JD 3020
1949 JD B
1949 Ford 8N
1955 Ferguson TO-35 - Location: Branford, CT
Hand lift control lever
Can it be mounted on the left side to lift the drawbar while still using the TC connected to the rear rockshaft? Want to use the TC for the snow plow and the lever for the drawbar.
- tmays
- 10+ Years
- Posts: 3402
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Re: Hand lift control lever
Not sure you worded this right. If you use the touch control for the snow plow then you don’t need the rear rockshaft attached for that. You can leave the manual lift on to control the rear. If I am understanding what you want to do. I’m assuming you’re using the snowplow on the front
Edit: in other words, no. Manual lift can’t be mounted in addition to touch control Rockshaft. They both mount in the same holes
Edit: in other words, no. Manual lift can’t be mounted in addition to touch control Rockshaft. They both mount in the same holes
Thomas
- radioguy41
- 5+ Years
- Posts: 1254
- Joined: Sun Jun 18, 2017 10:46 am
- Zip Code: 18235
- Tractors Owned: -
1957 Red IH Lo-Boy
1980 Red IH Cub Cadet 782
1993 Craftsman LT4000
Henderson Std. Loader
Planet Jr/Cole 300A Seeder - Circle of Safety: Y
- Location: Lehighton, PA
Re: Hand lift control lever
Are you asking about the plow depth control lever that adjusts the drawbar up and down? That would mount on the right side and is independent of the hydraulic system.
KB3WBB
-
- 5+ Years
- Posts: 1616
- Joined: Thu Mar 09, 2017 4:06 pm
- Zip Code: 06405
- Tractors Owned: 1957 Cub
1951 Super C
1966 IH 504 Hi-Clear
1968 JD 3020
1949 JD B
1949 Ford 8N
1955 Ferguson TO-35 - Location: Branford, CT
Re: Hand lift control lever
yes sorry...I want the TC to only control the snowplow. From pictures I have seen, it seems like when the drawbar is facing front, the lift handle is on the right side of the tractor. When the drawbar is facing back (in the towing position) should the lift handle be on the left side of the tractor if I want to lift and lower the drawbar?
-
- 5+ Years
- Posts: 1616
- Joined: Thu Mar 09, 2017 4:06 pm
- Zip Code: 06405
- Tractors Owned: 1957 Cub
1951 Super C
1966 IH 504 Hi-Clear
1968 JD 3020
1949 JD B
1949 Ford 8N
1955 Ferguson TO-35 - Location: Branford, CT
Re: Hand lift control lever
PS...I know I would have to disconnect the TC to rear rockshaft connecting rod.
-
- 5+ Years
- Posts: 1616
- Joined: Thu Mar 09, 2017 4:06 pm
- Zip Code: 06405
- Tractors Owned: 1957 Cub
1951 Super C
1966 IH 504 Hi-Clear
1968 JD 3020
1949 JD B
1949 Ford 8N
1955 Ferguson TO-35 - Location: Branford, CT
Re: Hand lift control lever
I saw a diagram ...It seems there are 2 types of "handles"...a depth adjusting lever (right side) and the master control lever (left side). Suppose they are not interchangeable.
- Slim140
- 5+ Years
- Posts: 4908
- Joined: Wed Nov 22, 2017 6:24 am
- Zip Code: 00000
- Tractors Owned: .
1970 International 140
1972 International 140
1949 John Deere A
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original - Circle of Safety: Y
Re: Hand lift control lever
Here's the hand lift for the left side. It could control only the back if you wanted. The one for the plow on the right side is not interchangeable.
Every home is a school, what are you teaching?
-
- 5+ Years
- Posts: 1616
- Joined: Thu Mar 09, 2017 4:06 pm
- Zip Code: 06405
- Tractors Owned: 1957 Cub
1951 Super C
1966 IH 504 Hi-Clear
1968 JD 3020
1949 JD B
1949 Ford 8N
1955 Ferguson TO-35 - Location: Branford, CT
Re: Hand lift control lever
thanks, yea I see they aren't interchangeable...figures I have the right one and not the left. Oh well. Another nutty scheme by the wayside
- Urbish
- 10+ Years
- Posts: 2428
- Joined: Sat Sep 07, 2013 3:45 pm
- Zip Code: 48158
- Tractors Owned: ~
1958 International Cub LoBoy
1947 Farmall H
1946 Farmall B
1953 Willys CJ3B
2022 Massey Ferguson GC1723E Subcompact
Cub Loboy L-54 Leveling and Grader Blade - Circle of Safety: Y
- Location: Manchester, MI
Re: Hand lift control lever
Master Control Lever mounts to it's own bracket that has the rockshaft bearings and rear lift arm integrated and mounts to the top of the transmission. The Plow Depth Control Lever is substantially different and mounts to two of the final drive holes. The Plow Depth Control Lever can be left mounted and functional if you are using touch control to raise and lower a front, mid, or rear-mounted implement so long is the implement doesn't interfere with the lever and brackets. The Master Control Lever can be left mounted for independent use of Touch Control to raise and lower a front or mid-mounted implement like a mower or leveling and grader blade only if the rockshaft linkage is not installed.
Jim
- Bill Hudson
- Team Cub
- Posts: 9518
- Joined: Wed Jul 26, 2006 10:50 am
- Zip Code: 44057
- Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe - Circle of Safety: Y
- Location: OH, Madison
Re: Hand lift control lever
Urbish wrote:Master Control Lever mounts to it's own bracket that has the rockshaft bearings and rear lift arm integrated and mounts to the top of the transmission. The Plow Depth Control Lever is substantially different and mounts to two of the final drive holes. The Plow Depth Control Lever can be left mounted and functional if you are using touch control to raise and lower a front, mid, or rear-mounted implement so long is the implement doesn't interfere with the lever and brackets. The Master Control Lever can be left mounted for independent use of Touch Control to raise and lower a front or mid-mounted implement like a mower or leveling and grader blade only if the rockshaft linkage is not installed.
You betcha.
Bill
-
- 5+ Years
- Posts: 1616
- Joined: Thu Mar 09, 2017 4:06 pm
- Zip Code: 06405
- Tractors Owned: 1957 Cub
1951 Super C
1966 IH 504 Hi-Clear
1968 JD 3020
1949 JD B
1949 Ford 8N
1955 Ferguson TO-35 - Location: Branford, CT
Re: Hand lift control lever
Thank you
Who is online
Users browsing this forum: D Reid, Majestic-12 [Bot] and 26 guests