I have tried every possible way to get the brake bands in the finals on my loboy. I've tried bending the ends of the brake bands, but even with the drum out of the final drive housing, the band won't slide over the drum. I'm not sure where to go from here. The bands were purchased from TM several years ago and are brand new.
Brian
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
loboy brake bands
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
cubbrian
- 10+ Years
- Posts: 916
- Joined: Sun Apr 08, 2007 7:47 pm
- Zip Code: 47631
- Tractors Owned: 1955 Cub w/9 different 1 point implements
1948 Cub
1948 McCormick W-6
1949 H
1949 M
1961 560 w/ 412 fast hitch plow
1966 140
1973 666
Allis Chalmers C w/sickle mower
Case 400
Economy 14 hp tractor - Location: IN, New Harmony
-
Dale Finch
- 10+ Years
- Posts: 6684
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: loboy brake bands
Don't know if this will help, but good luck!
http://farmallcub.com/phpBB2/viewtopic.php?f=142&t=14715
http://farmallcub.com/phpBB2/viewtopic.php?f=142&t=14715
Dale Finch
-
tst
- 10+ Years
- Posts: 5214
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: loboy brake bands
I have been there, I fine if you sand the ends of the linings to a 45 angle it gives the little extra room you need, most of the time they fit real tight but loosen up after you stomp on the pedal hard, seems to make them settle in
-
cubbrian
- 10+ Years
- Posts: 916
- Joined: Sun Apr 08, 2007 7:47 pm
- Zip Code: 47631
- Tractors Owned: 1955 Cub w/9 different 1 point implements
1948 Cub
1948 McCormick W-6
1949 H
1949 M
1961 560 w/ 412 fast hitch plow
1966 140
1973 666
Allis Chalmers C w/sickle mower
Case 400
Economy 14 hp tractor - Location: IN, New Harmony
Re: loboy brake bands
Dale Finch wrote:Don't know if this will help, but good luck!
http://farmallcub.com/phpBB2/viewtopic.php?f=142&t=14715
I found that in the how to section. It just won't fit. I think I'll try Tim's suggestion. That may give me enough clearance.
Who is online
Users browsing this forum: Bill V in Md, Flemmingth and 40 guests
