Print or layout of the final holes ?

[BigBill]

Is there a print or layout of dimentions of the lower threaded holes that holds the drawbar brackets? There’s six threaded holes I’d like to drill heavy channel and use the tapered bolts to hold them. I’m thinking about a future 3 pt hitch with a subframe.

I also need to mount two vertical angles for my backhoe on my 154. Same holes only verticle.

[Don McCombs]

This may help...

[BigBill]

This is one end, is there a print that connects both ends?

I have some heavy 8” x 3/4” thick angle I just need to cut the axle cover hole and drill the plug hole. I need the tapered bolts.

My neighbors kid used regular bolts. He ripped out the threads. The guy fixing it didn’t know about the tapered bolts. I told him. He opened up the holes and used ford one ton nuts on threaded rod. Better to ask a dumb question here when in doubt to be sure.