It shows a good charge at slow and medium engine rpms. As soon as you move the throttle to higher rpms the gauge needle jumps all over the place.Any ideas out there.
Wm
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Ampere Gauge
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 177
- Joined: Sun Jun 01, 2014 8:41 am
- Zip Code: 85233
- Tractors Owned: 47 Fcub
51 Fcub
57 Lo Boy FH
59 Lo Boy FH 45 Loader - Location: AZ,Gilbert
-
- 10+ Years
- Posts: 5206
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Ampere Gauge
put a meter on it and see if it reads ok, if the meter is jumping also probably a charging issue, if it reads steady more likely the gauge, analog meters work better on old charging systems than a digital meter
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Ampere Gauge
Are we talking about a system with a cutout, or a regulator? If cutout, most likely the commutator of the generator armature needs smoothed out. If a regulator, could still be same thing, but might also be bad regulator, or poor ground on regulator. Also check condition and tension on both generator and fan belt.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 5+ Years
- Posts: 177
- Joined: Sun Jun 01, 2014 8:41 am
- Zip Code: 85233
- Tractors Owned: 47 Fcub
51 Fcub
57 Lo Boy FH
59 Lo Boy FH 45 Loader - Location: AZ,Gilbert
Re: Ampere Gauge
Today I narrowed it down to the regulator. All I had to do is tap the side of the regulator and the needle would jump around.The next step will be to clean the contacts in the regulator and see what happens.
Wm
Wm
-
- 10+ Years
- Posts: 9
- Joined: Sun Apr 13, 2014 3:16 pm
- Zip Code: 00000
Re: Ampere Gauge
How will you clean the regulator contacts? With a file?
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Ampere Gauge
They make special very fine, very thin files for that, NAPA sells them, ignition files.
https://www.napaonline.com/en/p/SER2153 ... oint+files
https://www.napaonline.com/en/p/SER2153 ... oint+files
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
Who is online
Users browsing this forum: Mcdaniel2903 and 40 guests