https://flic.kr/p/2g4VgKq
Should this coil bar be difficult to remove, or should it slide in and out relatively easily? I’m thinking that it shouldn’t be this difficult to remove, because if it was difficult to remove, it’ll be difficult to get installed without cracking the case on the coil. Maybe the coil swelled up and that’s why it was hard to get out? This coil is no good I need to replace it, which is why I’m asking. Ideas?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Magneto coil bar.. tough to remove!
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- MikeEyre74
- Cub Star!
- Posts: 225
- Joined: Wed Apr 03, 2019 5:44 am
- Zip Code: 06063
- Tractors Owned: Standard F-Cub, 1949
John Deere Model A, 1948
Wheel Horse 312-8, 1987
Magneto coil bar.. tough to remove!
Last edited by MikeEyre74 on Wed May 29, 2019 8:44 am, edited 1 time in total.
Standard F-Cub, 1949
John Deere Model A, 1948
John Deere Model A, 1948
- Ken (48 Cub)
- 10+ Years
- Posts: 994
- Joined: Mon Feb 03, 2003 11:10 am
- Zip Code: 40023
- Tractors Owned: 1948 FCub
1957 LoBoy - Circle of Safety: Y
- Location: KY, Fisherville
Re: Magneto cool bar.. tough to remove!
Yes, it is a press fit and a tight one.
Ken, Annie the '48.
I think we gotter if'n she don't jump, Andy Griffith.
I think we gotter if'n she don't jump, Andy Griffith.
-
- Team Cub Mentor
- Posts: 4127
- Joined: Tue Jan 11, 2005 12:12 pm
- Zip Code: 13830
- eBay ID: adak8965
- Circle of Safety: Y
- Location: Oxford, NY
Re: Magneto coil bar.. tough to remove!
I drive the old one out with a hammer and a piece of wood. Clean it up good and it will slide into the new coil easier.
- MikeEyre74
- Cub Star!
- Posts: 225
- Joined: Wed Apr 03, 2019 5:44 am
- Zip Code: 06063
- Tractors Owned: Standard F-Cub, 1949
John Deere Model A, 1948
Wheel Horse 312-8, 1987
Re: Magneto coil bar.. tough to remove!
Ok! I got the parts on order and they should be here in a few days. I’ll report back...
Standard F-Cub, 1949
John Deere Model A, 1948
John Deere Model A, 1948
-
- 5+ Years
- Posts: 16
- Joined: Fri Oct 14, 2016 12:10 pm
- Zip Code: 39565
Re: Magneto coil bar.. tough to remove!
mine was tough as hell to remove, had to hammer on it pretty good.
Who is online
Users browsing this forum: No registered users and 38 guests