This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
IH Part number for Fuel neck straightening tool
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- ShawnAgne
- 5+ Years
- Posts: 838
- Joined: Sat May 07, 2016 5:13 pm
- Zip Code: 45380
- Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
1955 Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
1955 Farmall 100 (Thomas)
12V with Petronix
Woods L59 60"
A60 Leveling Blade
Front/Rear Weights - Circle of Safety: Y
- Location: Versailles, Ohio
IH Part number for Fuel neck straightening tool
Have a local dealer that thinks they may have the tool but needs the original IH number to look it up with. The manual on Rudi's server they said wasn't the actual number. Does anybody have an idea or know?
Shawn Agne
- Drfting1
- 5+ Years
- Posts: 543
- Joined: Wed Nov 02, 2016 7:25 pm
- Zip Code: 24151
- Tractors Owned: 53 Cub
59 cub - Circle of Safety: Y
- Location: Rocky Mount VA
Re: IH Part number for Fuel neck straightening tool
I believe this is it
https://www.steinertractor.com/ABC2672- ... ening-Tool
https://www.steinertractor.com/ABC2672- ... ening-Tool
Bill Longeill
- Drfting1
- 5+ Years
- Posts: 543
- Joined: Wed Nov 02, 2016 7:25 pm
- Zip Code: 24151
- Tractors Owned: 53 Cub
59 cub - Circle of Safety: Y
- Location: Rocky Mount VA
Re: IH Part number for Fuel neck straightening tool
It says it's the replacement for 05-572
Bill Longeill
- ShawnAgne
- 5+ Years
- Posts: 838
- Joined: Sat May 07, 2016 5:13 pm
- Zip Code: 45380
- Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
1955 Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
1955 Farmall 100 (Thomas)
12V with Petronix
Woods L59 60"
A60 Leveling Blade
Front/Rear Weights - Circle of Safety: Y
- Location: Versailles, Ohio
Re: IH Part number for Fuel neck straightening tool
Yeah that's the number i gave the local IH dealer they said it wasn't correct. Oh well.
Shawn Agne