This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Transmission spline shaft seal
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
Mht
- 5+ Years
- Posts: 408
- Joined: Sun Jul 08, 2018 9:02 pm
- Zip Code: 27606
- Tractors Owned: 1949 farmall cub(building from parts) 1950 farmall cub
1971 David Brown 880 selectamatic - Circle of Safety: Y
Transmission spline shaft seal
I’m resealing a transmission and purchased a national seal number 474250 based on a cross reference number I found on this forum. The seal I got is too small to fit the retainer. Has anyone else ran into this problem and if so do you have a different seal part number
-
tst
- 10+ Years
- Posts: 5209
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Transmission spline shaft seal
I have seen this many times, I have found that the seal fits in early cub retainers, if it is a later or replacement one the hole is to big for the seal
-
Mht
- 5+ Years
- Posts: 408
- Joined: Sun Jul 08, 2018 9:02 pm
- Zip Code: 27606
- Tractors Owned: 1949 farmall cub(building from parts) 1950 farmall cub
1971 David Brown 880 selectamatic - Circle of Safety: Y
Re: Transmission spline shaft seal
Yes I think that is the case. I pulled a seal and retainer off a junk transmission and the new seal fit fine so the problem is solved
Who is online
Users browsing this forum: No registered users and 23 guests
