Original front wheel seals

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Command52
Cub Star!
Cub Star!
Posts: 242
Joined: Fri Nov 24, 2017 7:40 pm
Zip Code: 19954

Original front wheel seals

Postby Command52 » Mon Feb 04, 2019 8:01 pm

Is there anyone who reproduces the original style front wheel seals, If not do you have a updated number for the wheel seals Im not having any luck with the numbers on the cross over chart i found on here Thank You Billy

tst
10+ Years
10+ Years
Posts: 4587
Joined: Tue Jan 12, 2010 2:08 pm
Zip Code: 12514
Circle of Safety: Y

Re: Original front wheel seals

Postby tst » Mon Feb 04, 2019 8:34 pm

national seal 6312, they are leather like the factory type, they are pricey, if the old ones are good leave them alone

User avatar
Glen
10+ Years
10+ Years
Posts: 5344
Joined: Mon Mar 19, 2012 7:33 pm
Zip Code: 00000
Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
Circle of Safety: Y
Location: Wa.

Re: Original front wheel seals

Postby Glen » Mon Feb 04, 2019 10:00 pm

Hi,
TM Tractor at the bottom of the page has the seals also. There are pics of it there.

http://www.tmtractor.com/new/st/592fp.htm

There is a felt there also.

http://www.tmtractor.com/new/st/856fp.htm

If the wear ring in the hub is gone, or bad, they have those also.

http://www.tmtractor.com/new/st/673fp.htm

It looks like all the parts are available at Case IH also.

You can gently lift and work the seal lip up again, and remove old grease from the seal, with solvent. They might still be good. I agree with Tim, if the seals are still good, it is easier to leave them there. The Cub owner's manual says leave the seals on the spindle when cleaning and greasing the bearings. :)


  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: phill_mi, staninlowerAL and 4 guests