Farmall Cub

Came across this this morning. Almost looks like a cub trailer. What is your guys opinions?

Do you have any Pics of the tailgate and tilt latch

Here are some more pics.

Hers a side pic of one of mine,if you want to compare?

FYI all the Cub trailers I have & had, had diamond plate flooring.

Looks like mine, accept for diamond plate.

From what I have seen, the Cub trailers all had 5-lug wheels.

The hitch is home made. Since one pic shows just the bed, my guess is somebody took a set of axles they had laying around and stuck them under that bed then built a tongue for it.

If it is IH or McCormick it would be a #10 with the 4 bolt wheels. Can’t see enough of the tounge to tell. It should have a Y configuration from the main tounge. Also there should be a tag on the tounge.

From the later pictures it looks like a #10 trailer except for the stake pockets at the bottom of the box outside. The tounge looks right and I think the #10 trailer had a smooth floor. If someone has a #10 trailer could you verify if the floor is smooth?

Dimensions are 4 by 7 feet. Have a chance to pick this up for 150.00. What is the size of the number 10 trailer.

So found online that a #10 trailer is 4X7. Same size as this one. Going to try to look at it soon.

#10 trailer is 4’ x 7’ with 4 bolt wheels. Tailgate swings down like a pickup or swings from the top like a dump truck. Front tilt lock is a pin through the tounge. None of the Cub trailers had a spring suspension. Good Luck!

McCormick or not, $150 would be a great price around here.