zoning

You also need to find out how your lot has been defined.
What is the rear line? What are the side lines? What is the front line.
I ran into that on our property a few years ago when we put up a 10'x9' shed. What the town defines as the front line is not what I would have thought!

Peter
 
You should be able to do the required mechanical drawings, property lay out, with out an architect. I would make up a drawing of the plot including current buildings. Add in the proposed building with the set backs.

Get on the zoning commission's agenda for a scheduled meeting. Show and explain your plans. Zoning commissions are usually very helpful. They can either approve the plan or will explain required changes or additional paper work required.

More research.
1) You may be able to expand the existing 24 x 24 building with less aggravation even if it is built closer to the property line(s) than the current set back limitations.
2) You local zoning commission may allow temporary buildings.
3) Check for tax abatement procedure on the proposed building.
4) Also check to see if expanding the existing 24 x 24 building will incur less property taxes than building a new seperate structure.
5) Building permit procedure.

Edit: Easements on the property?
 
Mr Joshua":2vtettv3 said:
thanks for all the replys. what i would really like is a 36 x 50 building.
Josh

Not to hijack this thread, but this is about what I want to build. Are you wanting to stick build, or buy something like a Morton building?

Al
 
Super A":2d5fktie said:
Mr Joshua":2d5fktie said:
thanks for all the replys. what i would really like is a 36 x 50 building.
Josh

Not to hijack this thread, but this is about what I want to build. Are you wanting to stick build, or buy something like a Morton building?

Al
Al
I have looked into stick buildings a little bit but am not sure what exactly i want to go with. I have thought about just a framed up building. I would like to insulate it and drywall the walls and ceiling. with the stick buildings it looks like you would have to frame in between the post before you could insulate or put up drywall. may be easier to just pour a slab and frame up walls on top of it.
I'm open to suggestions. Like i said before i am just in the planning stage of this.
 
Eugene":1u7xye18 said:
You should be able to do the required mechanical drawings, property lay out, with out an architect. I would make up a drawing of the plot including current buildings. Add in the proposed building with the set backs.

Get on the zoning commission's agenda for a scheduled meeting. Show and explain your plans. Zoning commissions are usually very helpful. They can either approve the plan or will explain required changes or additional paper work required.

More research.
1) You may be able to expand the existing 24 x 24 building with less aggravation even if it is built closer to the property line(s) than the current set back limitations.
2) You local zoning commission may allow temporary buildings.
3) Check for tax abatement procedure on the proposed building.
4) Also check to see if expanding the existing 24 x 24 building will incur less property taxes than building a new seperate structure.
5) Building permit procedure.

Edit: Easements on the property?
eugene
thanks for the input.
the 24 x 24 i believe must have been built before zoning had restrictions on set back. the back of the garage is about 13' from the back property line. I have looked into adding on to the existing building but would not be able to add much to it considering the direction the roof line is on the property. the building is pretty much in the corner. Also the current building is pretty old. I have thought about replacing the building but where its at on the property they may not allow me to rebuild there cause of setback. Plus i like my space and it sure would be nice to have a building for tractor storage and another to park our trucks and toys as well as have space to work.

The front of the property meets up to a county road, the left side meets up to a neighbor whose house is for sale and the other side and back meet up to a church property. the side meeting the church is where i would like to build. I believe that no one in that area would have a care in the world that i build the building. The only way you would see it is from the front of my house and the church property where the road leading to the church is.
 
Josh, why don't you swing by sometime and take a look at my setup. There is a place near Belgrade that if you take them your plans for a metal building, they will give you a kit price for all materials except for concrete. They can even provide installation if you want. Once it is erected you can do the interior and wiring as you have time.

driveway.jpg

inside%20south.jpg
 
John
I have been in your garage before. for some reason i thought it was pole construction. I will have to check out that place in belgrade. One thing I would want is a couple 16' wide doors on the side or 4 ten foot doors. thats one problem i have with pole construction is the span of the doors on the sides.
 
When you measure for your setbacks , it is common in many areas for the setback to be measured from the overhang of the buliding and not the edge of the slab or wall. Not sure what it would be in your area. :D
 
Josh: Read over your description of the property.

Suggest drawing up the current plot plan and another with the proposed location, where you want your building. Forget about the set back. Just put the new building on your plan where you want it.

Obtain a copy of the aerial photo of your and adjacent property.

Approach the local zoning commission with your plan. During your discussion with the zoning commission ask for or about a variance on the set back. From you description, the variance should not be a problem. You may only have to obtain permission from the church for the exception.
 
I just found "SECTION 400.2870: ACCESSORY STRUCTURE -- ACCESSORY BUILDINGS TO BE PERMITTED IN RESIDENTIAL DISTRICTS" addresses size of accessory buildings. It also mentions rear setback for very small buildings, still nothing on the size you are considering. Some rules depend on your exact zoning district. What is your district?
 
Jim Becker":1zkzw2iz said:
I just found "SECTION 400.2870: ACCESSORY STRUCTURE -- ACCESSORY BUILDINGS TO BE PERMITTED IN RESIDENTIAL DISTRICTS" addresses size of accessory buildings. It also mentions rear setback for very small buildings, still nothing on the size you are considering. Some rules depend on your exact zoning district. What is your district?
Jim it looks like i am located in in district R40.
 
Back
Top