Zapped again

Eugene

501 Club
Ytmag board had a question on the Cub planter. I posted that this board and ATIS board had current threads with significant discussions on Cub planters.

Checked back an hour later and my post is gone - again. You know what really ticks me off? I have recommend the advertisers on ytmag board and suggested the ytmag board as a source on different makes of tractors.

I need some parts for my non IH antique tractor. I WAS preparing an order for one of the advertisers on that board. Someone lost a sale.

Eugene
 
Eugene,
Make sure you notify the advertiser of your decision and why. The only way they will know is if someone tells them what is going on.
 
don't know if Kim is getting hard to get a ong with or if she has an asstant moderator, but I frequently direct prople to YTMAG from other sites with no problems, but shee seems to feel this is a competition, and won't allow postings directing people to another board or to a competitors of her advertisers.
 
I know there's good info (and good people) over at YTMag, but I never log into it.

I get everything I need right here.
 
Part of the irony of the situation is that when Kim started YTMAG, the first place it was announced was on ATIS.
 
Jim Becker":3kfm4pab said:
Part of the irony of the situation is that when Kim started YTMAG, the first place it was announced was on ATIS.

Correct me if I'm wrong, Jim... but I think YT was started by a different ATIS regular. I think her name was Kate Smalley.
 
I could have it wrong too, but as I recall Kate Smalley started antiquetractors.com . YT was started by Chris and Kim Pratt. Somehow, antiquetractors.com seems to now belong to YT. Their copyright statement reads "Yesterday's Tractor Co. - A Washington State Corporation". I believe Kate is in New England.
 
I used to frequent YT, but with the way other sites are handled there, I havent been visiting. I think that customer satisfaction is what keep people buying from a particular business. And most people have their favorite places to do business. I dont feel that mentioning another site is counterproductive to what goes on on these forum boards. I have bought from YT advertisers and Farmallcub.com advertisers. I think its foolish to alienate people from your advertisers by not mentioning other sources. It seems that YT is no longer a service so much as it is a business now. Ok...I;'ll shut up.
 
BD can attest to this...

Any time and I do not know the reasons for this, that I post the Cub Manual Server in the url link box, the link does not work. I can post pics but not the link to the server.

Seems Kim has killed all links to other tractor boards or tractor related sites.

What irks me is that I have had the link to YTMag on the server for as long as this new format has been up. Kim and and somebody else )Steve if I remember correctly) have sent me emails asking if it was okay it they put an active link on the forum to the server as they thought it was a great resource. Of course I said yes..... ahh duhh, .

I have been thinking for about 3 or 4 months now that I am going to remove the link from the server, and I am going to tell Kim why.

I really have been leary of hurting feelings, so I have delayed, but in light of what has been happening lately, I think I am going to do it.

I just think that it is kind of childish for this type of stuff to go on....

Dennis has never said that links to any other forum was not allowed... especially if those forums carried stuff his didn't. 1 forum cannot be all things to all people. A few have tried and/or are trying but they are not succeeding well.

Anyways, that is my story and I am sticking to it :!: :roll: :oops: :roll: :wink: :lol: :wink: :lol:
 
We ought to bombard the site with "Eat at farmallcub.com" stuff so that the admin for the site will be overwelmed trying to get it all off. :lol: :lol:
 
A poster on the ytmag board asked how to convert a WD Allis from 6 volts to 12. I just e-mailed a poster with the following:

Poster's first name: Return the e-mail. Last time I posted with the answer to this question my post was removed from this board. The conversion is quite inexpensive - you don't need to purchase one of the kits.

I'm not selling parts.

Eugene
 
I may be wrong, but could it be possible that the site uses software that catches web addresses and deletes them?

Just a thought.
 
Another chapter I guess.

Last night I tried to respond to Amos. I used my standard YTMag Cub Welcome Wagon text, had the manual url in the url box blah blah... hit post and got dumped back to the thread page... Tried again, same thing. Removed the url in the box. Same thing. Rebooted, thought maybe I had a corrupt file or something - tried again - same thing.

Finally I cleared all referenced to the manual server, farmallcub.com and binder books... and the Topic: 1952 Cub worked.

Amos:
I have tried to post a response to this thread a half dozen times... and I can't seem to post when I have url's for the farmallcub forum or the atis cub forum or even for binderbooks web site.

I am trying to give you free helpful information, but it just bumps me back to the first page..

Hopefully this will work.

You will have to insert the http:// and the www, but here is the url: cleancomputes.com/Cub/index.html.

That is the address of the Cub Manual Server. Check it out it is chock full of information.

If nothing else, do yourself a favour and check out the Cub Specific Forum at farmallcub-dot-com. 1750 plus Cub Owners cannot be wrong.

Welcome to the world of Cubs Amos, and I sure hope that you do enjoy the greatest of the Letter Series tractors -- size is not everything...

I then tried my usual work around... guess what.. I cannot even send email through the safe mail assistant.

Gives me an error -- something wrong with the email address....

Yeah there is something wrong - it has been blocked.
 
John:

I have a tendency to agree.

As many of you know, I am pretty easy to get along with. Not too much gets me riled up.

Yeah, sometimes a little patriotism doesn't hurt too much, but I really don't get riled too much, especially where my favourite hobbies are concerned which happens to be Farmall Cubs and computers. They are like my trout - very relaxing and restful whilst providing endless hours of enjoyment.

However, I am at the point where YTMag's link is going to disappear as a viable link to their site. I cannot justify recommending to anyone a site that I am not happy with. As with Garden Web and the old TF.com, they are not sites that are happy. So, poof.. as soon as I get a minute, it is going to change.
 
This site is so terriffic that I glanced at the others and never went back. Every one on farmallcub.com should be proud of the good work and help provided to all. Bye the bye I noticed we have another newbie from Australia.

Bill Sorensen
 
Back
Top