Your tax dollars at work

ScottyD'sdad

501 Club
i bought a small part from DE farmall parts. Package arrived in Dallis post office, Oct 24. Arrived in Springfield Ma.Oct 26. Left Springfield Oct. 27. Arrived in Rehoboth Ma. (two hours from Springfield) Nov.4th. My dog could have pushed it along on the ground, with his nose, from Springfield to here, in less time. (and he has a bad leg.) Ed
 
Just like life ED. It beats the alternative. At least you got the part. Be glad it wasn't the wrong one.
Talking about Parts. I needed an Idle air tube for my power unit. $26 for that precision little piece of brass. The old one was rotted off and the broken end was still in the carb top. I like left handed drill bits. The threads were badly oxidized so I had a fit getting 4 48 taps. All my sets only have 4 40. Any way I will bring same with me to Cecil's in February. Hope to see you there.
 
beaconlight":17e3hjok said:
The threads were badly oxidized so I had a fit getting 4 48 taps. All my sets only have 4 40. Any way I will bring same with me to Cecil's in February. Hope to see you there.

Bill, Thanks to the great advice I've gotten over the years on the Cub's carb from folks like Rick Prentice, Phil Lenke & Carl, I have the tap for the idle tube as well as some "Itty Bitty" drill bits that require a pin vice drill. If you'd like to get the carb fixed prior to Feb, I'd be happy to put the tap, drills, etc. into a box and mail them to you. Or if you'd rather, you can send that portion of the carb to me and I'll remove the excess material of the old tube and chase the threads for you and mail it back to you.
 
Thanks for the offer Mike.
I stopped in A 1 Machinery in Elizabeth and picked up 6 of those little taps. I will bring them to Cecil's in February in case any one needs a tap they can have one for what they cost me. Odd ball stuff like that I get when I can. I picked up 3 idle air tubes at Catskill Tractor in Franklin NY, about 2 miles from my place in the country. I'll bring them with me too. I know i used to have a pin vise years ago when I was in to model planes. Have to see if I can hunt it up.
I came home for Election Day and have a full plate with Family stuff till after Christmas. I just hope I can fit in a trip to put Bamby's Mother in the freezer. Deer are so plentiful around Franklin it's hard not to hit one with the truck. Buck only hunting doesn't keep the herd in check.
 
beaconlight":1vync1sp said:
I know i used to have a pin vise years ago when I was in to model planes. Have to see if I can hunt it up.
Bill, do you have a Harbor Freight close by? I'm like you, I had one when I used to build my RC planes and I couldn't find mine, I was in Harbor Freight one day and there was a pin vise drill set there on the shelf complete with some twist bits.
 
Back
Top