Dan England
501 Club
I learned this lesson shortly after getting my first Cub. A set of front cultivators was the only implement which came with the Cub. I wanted a belly mower and learned that a fellow in our community had one for sale. When I visited him and bought the mower he told me that there was a pile of items which came with his Cub, that he had no use for them, the wife said that they had to go and that I could take any, or better still, take all of them. Whatever was left would be discarded. I looked through the pile and, being new to Cubs, took only a few items. I learned later that I had a couple of parts of a fast hitch and, looking at pictures, recalled seeing other parts which I did not take. I checked back with the fellow but the items had already been discarded. Later, I bought a group of service manuals, a stalk chopper, hammer mill, belly mount disk plow, and a belly mount blade from a retired Farmall mechanic. He also invited me to take other items which he had no use for. I took a nice six inch flat belt pulley but when I got it home, I found that had no splines so wouldn't work on my Cub. Last fall I bought a M-H Pony which I am currently cleaning up and repairing leaks. I ran across the pulley last week and wondered if it might fit the Pony. After cleaning it up, I discovered a parts number, 850 217 M1 and found that it does fit the Pony. I was reminded of this when I read in EJP's post that sadly he inherited a tendency to keep items. Sometimes, as with the flat belt pulley, keeping those items for which we have no use turns out to be a good thing. Dan