What is the diffrence in the A'S??

L

little_red_cub

Member
O.K. My question is , What is the diffrence between the A and the Super A? I have just traded for an A or Super A . It say's A cultivator on the side, but I was just wondering the diffrence between the two.I am also wanting to know where the serial number location on ethier of the two.So I can find out the year of this tractor.
 
The big difference is that the Super A almost always has Touch-Control and the A never did. Many smaller details differed between the 2.

The serial plate on most As and all Super As was on the left seat bracket.
 
little_red_cub:

On the Cub Manual Server, if you scroll down to Other International Harvester McCormick-Deering Farmall Tractors, you will see the links for the A-b and the Super A and Super AV Tractors.

Undr the A-B, so far there is just the TC-26E Parts Calalog, and the Super A and Super AV has the Super A - Super AV Owner's Manual, the Super A Special Attachments and the TC-39B Parts Calalog. This should be enough to show you the basic differences as well as the location of the serial tag.
 
So What was the difference in the A and the AI . My fater in law has an AI and What I have been able to observe is that it has a throttle pedal and no hydro.
 
That pedal and the front axle. In the Supers, there was a minor difference in the valving of the Touch-Control.
 
Can you retro fit hydrolics to the A from a Super A :?: The farmer across the street said the engine block was different and the hyd would not have a mounting spot. I was wondering as my dad is thinking of getting a A and putting SA hyd unit on it.

Billy
 
Not worth trying. The farmar across the street is right about the block. The bell housing dosen't have a place for the main Touch-Control unit. Gas tank outlet is in the wrong place. Then if you want to actually mount something that uses the hydraulics, the final drive housings are wrong. The fenders won't support the rear rockshaft. . . .
 
Nice replies Jim! As always, a *master* of all things Farmall :D

I bought a second hydraulic unit off eBay because I thought mine was bad, but it's actually working top-notch. The new unit came with two curved arms on it, each with a single hole in the end, instead of the three arms with "holding pins" on them like the one on my tractor. What is the difference and does the "two arm" unit still use both hydraulic levers?

The reason I ask is that I *just* received yesterday a 2-point hitch for the Super A, and a Category-1 3-point hitch to retrofit to it (not the super-de-duper expensive one from RedLandHill on eBay for $459, but their Cat-1 kit for $130)...

I haven't even taken them out of the box yet, but I'm figuring on hooking them up to the outer arm on the left side of the tractor somehow... The arms on the Super A look awful thin compared even to my Cub :shock:

I think today's rain is a good opportunity to take off the Hesston loader and to play around with putting on the 2 and 3 point hitches.
 
Jim Becker":2466o3og said:
the final drive housings are wrong. . . . .
Click to expand...
Jim, is it possible that the late model A had the same characteristics as the Super A as far as the final drives? The reason I ask is, my Super A right side final drive broke and I bought an A and used the final drive, front axel, and radiator on it from the A. I then sold the A to a guy in Indiana. The only thing I can think of is a previous owner changed the final drive from the A to one from a Super A. I can't find any previous owners kin to find out what he did. But whatever it is from, it works well on my Super A with my 3 point hitch.
 
Merlin":23rbeblk said:
Jim, is it possible that the late model A had the same characteristics as the Super A as far as the final drives?
Click to expand...
I really doubt it. The tractor Parts Catalog doesn't show any change, nor does any implement Parts Catalog or Owner's Manual that I have seen (including ones published after A/B production stopped). My B has a serial number 215xxx (September '47) and it has the early style housings.

An interesting thing about this change, it was approved as a running change for the '43 sales year. However, WWII interfered and there was no A/B production in '43. The change didn't happen until the Super A came along. (Well, the Cub was already being built that way.)

The A and Super A front axles were the same. The later A radiators were the same as the Super A radiator.
 
Well I found out by Jim and the place I got it from that it is a SA. I am glad to. I have a 1948 farmall cub w/belly mower, and now a farmall SA with implement's.A pull behind blade, 2 diffrent disk a plow; I think is a potato plow, and a bush hog.(don't know the yr. yet). Do you all think a 1950 ferguson was worth the trade? It had a blown head gasket, but a nice paint job.It also ran.I was worried at first about the SA the hyd. wouldn't work , but then a little fluid and up and down it went.I am happy with it. Already done cleared a spot behind the shop for a lean too for the tractor's and my military jeep.Well thank's for the replie's.
 
You must log in or register to reply here.
Back
Top