Welder rust on wire spool.

Jeff Silvey

501 Club
Well after the Winter Cub Fest I went & bought myself another welder. Hobart Handler 140. It came with 2 regulators, 4 ft tank, cart & the welder. I did notice that the wire had a light coating of rust on the spool. I played with for a 1.5 days. I thought I will just change out the wire I have to see if thats the problem it was. The lady I bought this off of said her husband had retired then got sick I think he didnt use this welder much.
What can I do to keep the moisture away from the spool of wire?I have done several projects sense I got it this week. I think this will be a good welder for me. I had a Clacke Hot Shot at the cub fest that we used with Gary Dotson tank it was awesome to see how great it welds with gas. It worked OK for my first welder. I sold it within a hour of asking my ff friend if he was interested.
I really don't want to get rid of the 10lb spool of wire if I can save it. I have removed the bad wire, but it will set maybe for a while till I get to use the welder. I didn't know if anyone else has had this problem?
Thank
Jeff
 
Jeff, when I bought my welder, I had the same situation. I also had to replace the feed tube (from front of welder to handle) and the guy at the welding shop told me to NOT use the rusty wire, unless I wanted to replace that tube again. They did sell me some wipe/pads with a solvent type solution to wet them with. You then feed the wire through those pads. It will take care of a very light coat of rust, but nothing heavy. They actually refer to it as a "lube" rather than a "cleaner".

**EDIT**

I still have the piece of a roll of wire ifn you want it.

My pads are simply pieces of felt folded over with a spring clip holding it together.
a20791c1337aa42a252a05_m.jpg
 
Jeff,
Was doing a little research, after reading your post. One guy posted this on a forum. Sounds interesting.


I live in a very humid place, so I take my roll off when I'm through and put it in my house. Never had a problem yet.
 
Consider dry storage like is done for arc welding rods. A small box with a lightbulb will keep the moisture away. Some use an old refrigerator with the light wired to stay on all the time. If you can pick up one of those small dorm fridges at a yard sale it would make a dandy storage container for wire spools. But you would have to add the light.
 
My brother-in-law works for National Standard and can get me welding wire for free, however it is uncoated . After struggling with the same problem you have been having, I bought some coated wire (looks like copper plating) and the problem is solved. I will not use any welding wire that is not coated anymore. Hassling with uncoated weld wire is not worth it, even when it's free. The spools of uncoated weld wire that I have is now an endless supply of safety wire.
 
Ricky the wire I have is like what you decribed. It is used with gas. I did do what Roy had mentioned. I cut a small patch of scubbing pad wrapped it around the wire & put 2 or 3 zip tie's around the pad not to tight so the wire will adance when welding. Like BD said a fridge is ideal for welding rods & wire.
 
Jeff, your "new to you" welder has probably sat unused for quite a while. Coated wire will eventually rust, but it's not much of a problem if the welder gets used once in a while. The rust may just be on the outside of the spool, try un-spooling 25 - 30 ft. of the wire and see if you get to clean wire. If you do, you can use the rest of it, if not, get a new spool. I've never used uncoated wire, but I can imagine the issues it could cause in a seldom used welder. I really like that wiper idea, I think I'll add that to both of mine.
 
Back
Top