WANTED - Cub Shifter Gasket (new) & Shifter Spring

[AL Farmall Boy]

Wanted to check here first before ordering new to see if anyone had a NEW Gasket they didn't need, and a good used spring for the shift lever. I am making a door handle from a cub shifter and need the gasket to use as a pattern to have a solid backer plate cut from steel. Wanted to ask here because I would rather help someone here if they had one they didn't need before just ordering away.

Gasket p/n: 351546R1

Spring p/n: 350883R1

 

[staninlowerAL]

Chase, I can't help Sorry. Just wonder if you have any L22 sickle mower parts? Just thought I would ask. Tks Stan

 

[AL Farmall Boy]

Chase, I can't help Sorry. Just wonder if you have any L22 sickle mower parts? Just thought I would ask. Tks Stan

Not that I am aware of Stan. If I happen to run across anything I'll let you know. Anything in particular ? L-22 is for the offset Cub LoBoy, right?

 

[staninlowerAL]

Not that I am aware of Stan. If I happen to run across anything I'll let you know. Anything in particular ? L-22 is for the offset Cub LoBoy, right?

Yep Offset LoBoy 1955-1968. I need the drag link and mounting brackets, front and rear or at least a template/measurements that I can fab them. Pics and parts/setup/operators manuals looks like cold roll and flat plate probably 3/8 inch. I think the C22 mower will work with the correct brackets. Thanks for any help. Stan

 

[AL Farmall Boy]

Yep Offset LoBoy 1955-1968. I need the drag link and mounting brackets, front and rear or at least a template/measurements that I can fab them. Pics and parts/setup/operators manuals looks like cold roll and flat plate probably 3/8 inch. I think the C22 mower will work with the correct brackets. Thanks for any help. Stan

Can delete this post. I'm getting the parts from JP Tractor.