Trying to Find Wheels and Tires for a McCormick 100 Manure spreader

[DLPerry]

Does anyone out there have a source for wheels and Tires for a Model 100 Manure spreader, appear to be a 16 inch wheel with 6 lug and negative backset 0f 3/4 inch or so, if the ones I have are stock?

 

[tst]

BKT brand makes the tire for it in an Ag tread

 

[Bob McCarty]

The tires should be a 5.50 x 16". No idea where to get the rims unless they are off a parts spreader. Are the rims shot, or could they be repaired with some welded patches?

 

[Matt Kirsch]

Measure the bolt pattern. If it's 6-on-6" it's a standard 6-bolt implement wheel.

 

[Don McCombs]

Try calling JP Tractor Salvage, a forum sponsor.

 

[Dave F.]

Does anyone out there have a source for wheels and Tires for a Model 100 Manure spreader, appear to be a 16 inch wheel with 6 lug and negative backset 0f 3/4 inch or so, if the ones I have are stock?

If your rims are bad you can get replacements at Millertire.com & reuse your wheel centers. Dave F.

 

[Barnyard]

If your rims are bad you can get replacements at Millertire.com & reuse your wheel centers. Dave F.

The wheels and centers should be one piece.

 

[Matt Kirsch]

The wheels and centers should be one piece.

True but you can buy blank rims, cut the spot welds/rivets holding the center in the old rim, and weld the centers into the new blank rim...

 

[BSR]

Does anyone out there have a source for wheels and Tires for a Model 100 Manure spreader, appear to be a 16 inch wheel with 6 lug and negative backset 0f 3/4 inch or so, if the ones I have are stock?

I have a set of rims off a 100 spreader that I would sell. There the earlier ones, spokes.