The sign said "Stop"...

Barnyard

Moderator
Staff member
... or is it "Finders Keepers"?

I was headed out this afternoon and came up to the three way stop at the end of our road. I came to a stop and then proceeded to go. Just as I entered the intersection I realized the oncoming truck wasn't going to stop at the sign. I hit my brakes and he hit his. I guess he was a little irritated with me for making him slow down because he decided to give me a friendly finger gesture then he gunned the engine as he sped out of sight.

When he gassed it I heard a thump so I looked back as he went on his high speed way. I ended up with a little present in the road.

DSC00749.JPG


It's a pretty decent eight pounder. Normally, most of us in the area would always put things like this along the road where it could be seen if the owner came looking for it, but lately we have noticed that another driver would just stop and claim it so we stopped that practice. I decided to throw it in the truck and haul it home. Maybe it was a good thing it fell when it did. It could have bounced out and gone through the winshield of an oncoming car.
 
Mike in Louisiana":1x2kb11e said:
I guess that is going to be another present for Miss Rosie. How thoughtful. :D :D :D
Yes, her birthday is July 28 so this was just about as timely as it gets. I hope to find a decent wedge along the road before then also. Winter will be here before you know it and those will come in handy for her when it comes to splitting the fire wood.
 
Good score BarnYard! I picked up a 30' stanley tape measure from the middle of an intersection about 1/2 mile north of Charlotte Motor Speedway. Would surely have been destroyed if left there. Timing was everything, for me and the tape!
 
A friend of mine worked on the county highway maintenance crew. They were patching pot holes down the road from me and he saw a 1/2" ratchet in the road. He went to pick it up and saw it was a Craftsman. Then he saw a few more tools scattered about, so he followed the trail. He said within 50' he found the Craftsman tool box in the high grass with some tools in it and many strewn about. His guess was it fell out of a truck and scattered everything as it slid along the road.

I still have an industrial two wheeler that looks like it fell from a pop delivery truck. It was in the middle of the entrance ramp to I-74 just before dawn as I went to work. A few cars ahead of me swerved around it and went on. I jumped out and grabbed it. It was skinned up a bit but nothing broke.

DSC00750.JPG


There's a lot more out there than possums and cats! :lol:
 
I guess he was a little irritated with me for making him slow down because he decided to give me a friendly finger gesture then he gunned the engine as he sped out of sight.

He probably thought you was bi-lingual.
 
I recall from many years ago an old fellow in our community who drove a not-well maintained Model A. Those mechanical brakes were seldom at their best and his were far from perfect. One day he made a "rolling stop" and was observed by a patrolman who pulled him over. The patrolman asked him if he saw the stop sign. "Sure I saw it". "Why didn't you stop?" "I did stop. The sign said stop, didn't say stay all day".
 
DSC00749.JPG


On the "plus" side, next time your float sticks in your Cubs carb, you'll have the right tool to free it up!! :stooges:
 
ricky racer":3az9l1m6 said:
On the "plus" side, next time your float sticks in your Cubs carb, you'll have the right tool to free it up!! :stooges:

Oooh, Cecil will love that!!
 
ricky racer":fu0bzslf said:
On the "plus" side, next time your float sticks in your Cubs carb, you'll have the right tool to free it up!! :stooges:
What a coincidence, Raymond and I used it on a stubborn Cub this evening to no avail. I must have an electrical problem!
 
Barnyard":28qxkqso said:
What a coincidence, Raymond and I used it on a stubborn Cub this evening to no avail. I must have an electrical problem!
I wanted to give it one more good shot, but Rosie didn't want me to put a scratch her new present!! I've got a lot of road ahead of me, I'll keep an eye out for that wedge.... :D
 
BFH,,,,,,???? First when i started doing firewood i split my first 20 cords by hand with an 8lb sears sledge and one of sears green 8lb mauls. I earned my wood splitting wings and built a log splitter next.

We were doing brake tests in a test elevator in Yonkers,Ny at the very first test tower(1800's). The elevator guide rails come in different lengths so its hard to pull a ruined rail out of the stack in a hoistway and have the new one slide in. We didn't ruin all the guide rails so changing one is possible at time. Now were in the middle of the stack with a gap between the two tounge and groove fitted ends on the guide rails. I love working with new engineers fresh out of school. He said we have a big problem now? I went up to the machine room and grabbed the 16# sledge hammer(BFH). I smacked the top of the last guide rail as someone watched the gap close up. With three of four heavy wacks i was done and the rails were perfect again. There's nothing we can't do with a BFH. The rails are held by sliding clips that can let the building sway and the rails flex a little. They will move when i hit them with a 16# BFH with my 350# behind it. The new engineer never said a word that night while we were having 32oz & 48oz prime rib dinners. Work hard eat hard too. I was fresh out of the woods from loggin so i was in excellent condition. I was in the best health of my life when i was loggin. Its when i took the wimpy engineering tech job is when my body started going down hill. Before all this i was machine building and we would jockey 25 ton parts with pry bars to line them up to bolt them together. So these little elevator parts wasn't going to intimidate me.

I also worked with a wise cracker too, my co-worker. He never said anything to my face yet. Being new on the job i kept my mouth shut. We were working together and the crane was 2'' too short to change a 315# sheeve(pulley) on the gear box(elevator machine). I stood above the gearbox on the beams ans said for him to unhook the crane when i lift the sheeve. He did and i installed the sheeve by hand. He never said a bad word to me from that day on. In the woods i ran a 25lb 100cc chainsaw all the time. My weight was down to 290lbs and never went lower. When i grabbed on to anything it moved.
 
Barnyard":1m0igdog said:
Mike in Louisiana":1m0igdog said:
I guess that is going to be another present for Miss Rosie. How thoughtful. :D :D :D
Yes, her birthday is July 28 so this was just about as timely as it gets. I hope to find a decent wedge along the road before then also. Winter will be here before you know it and those will come in handy for her when it comes to splitting the fire wood.
:bellylaugh:
 
Back
Top