Opinions on Kennedy Tool Chest

Peter Person

501 Club
Looking for opinions on the Kennedy Tool Chest for sale in this Craiglist posting. I have contacted the seller.
Aron is aquiring more and more tools for his Welding/Fabricating program at the VoTech High School and for his 4H Club and is outgrowing his Craftman Tool Box.
His goal is to attend a VoTech College and he will need a significant amount of tools sometime down the line.
...so what are your thoughts?
http://nh.craigslist.org/tls/2706253859.html
5O05Z55R53n03p03o4bc56f7898467d1f1c73.jpg


Thanks,
Peter
 
Kennedy used to make a pretty good tool box. I suppose by today's standards an old Kennedy chest set would be pretty well made.
 
The drawers on the top box look very small ( thin ) . Make sure you get a box that will accommodate the size of tools Aron will need.


Russ
 
Kennedy was always the sign of a real machinist. They are very well made. But Russall makes a good point. I believe they were 'designed' for machinists and they use different (cleaner and smaller) tools than a mechanic. If I recall they have felt lined drawers for micrometers, calipers, gauge blocks and such. Probably a good value, but be sure to consider what kind of things need to fit in it.
 
I agree with the others, Kennedy is a good tool box but I always avoided the machinist boxes because of the shallow drawers. If, on the other hand, that is what suits him, it looks like a decent deal.
 
I have seen a lot of Kennedy tool boxes, but never a bad one. I do have to agree with the others about them being for the machinist though. Therefore I have never owned one.

The bright side is, they are made in the usa.
 
Kennedy makes both mechanics and machinists tool boxes. Reading the CL description, it says the bottom is a mechanics box and the upper one is a machinists box. Kennedy is absolute top line and usually priced accordingly. If you can get by the seller, just go look at it and see if it will work well for him. But before going, take a look at some of the other options at places like Home Depot, Sears or Northern Tool. You may find something from a less expensive line that is adequate and may have drawers of more useful sizes.
 
I own a Kennedy like the small one on top. It is one nice box. I keep my smaller more expensive tools in mine. I've had mine for years and always enjoyed just opening it up and admiring the felt lining and smooth slides.
Great box.
Roy
 
Having made my living out of a tool box for the last 30+ years, I can attest to Kennedy tool boxes being top notch. However, as stated by many others, working in the Welding / Fabrication trades he will want a box with deeper drawers than a machinist box. Also, the bottom box should have some pretty big deep drawers also to store a welding helmet, jacket and gloves.

I'd stay away from a machinists box. The bottom box that you have pictured would work pretty good but he would probably want an add a hang on cabinet to house the bigger items he will be using.

A really good style of box for a welder / fabricator is the one pictured below. He could add a top box if needed or he can add a something to the top (plywood or plate steel to make a small portable workbench. He can even add a small vise to the top. This is just my opinion but it comes from many years working out of a tool box.

tool_box.jpg


This box sells for $610.00 at Lowes:
http://www.lowes.com/ProductDisplay?par ... &cId=PDIO1

This box sells for a little over $800 and may be a little more stout (heavier gauge) and has a work surface already on it:

tool_box_1.jpg
 
Back
Top