Old Value Guides Use.

Jeff Silvey

501 Club
Well I tried to get some fuel oil out of an barrell today via a hand pump jack rabbit. I tried I looked down the hole to find the hose was not even close to the liquid. So I said to my self darn. LOL. Took the pump home to heat up a bit still no improvement. So I thought I just took out the value guids on the Demo would that work for a little weight. Not big enough for the hose i have so i drilled them out. One was not enough in my book so I put two worked great. Went & tried it worked Great for getting the hose lower than the surface. I did heat the end of the hose with an grill ignitor to make the hose soft so I could flare it to make it so the guides would not com off w/o force. Play around with the guides they do come in handy other than guiding value's.
Be SAFE

normal_IMG_0387_%28Medium%29.JPG

Jack Rabbit Pump

normal_IMG_0386_%28Medium%29.JPG

Value Guide's

normal_IMG_0385_%28Medium%29.JPG

Finish.
 
Instead of heating the pump and hose, why not throw some heat to the fuel. It'll come outta that barrel then. :lol:
 
Good idea. One of the problems with using plastic hose is that it curls up, not dropping to the bottom of the barrell or tank.
 
i have a junk box of used stuff we never know when something will be used again after all it saves us the cost too. Bill
 
Back
Top