Newest lighting products

Bus Driver

501 Club
As you know all too well, regular 100, 75, and 60 watt incandescent lamps (typically called bulbs) are no longer manufactured in the USA and are seldom imported. The spiral compact fluorescent (CF) was one of the earliest substitutes. Now the CF is being phased out by manufacturers and the LED is becoming more popular and prices are decreasing.
Perhaps this post will help someone.
The designation A19 was the standard for the 60 watt incandescent. The A is an arbitrary industry standard shape adopted many years ago. The 19 is the major diameter in 1/8 of an inch, thus A19 is 2 3/8" diameter. The 100 watt was A21. This is important to consider when selecting lamps (bulbs) to fit a particular space, such as an enclosed fixture. Both size and shape are important if the lamp is to be used with a clip-on shade, such as with many table lamps.
The typical base is called Edison screw base, typically interchangeable with the metric E26 and E27.
CF and LED produce relatively little heat but until recently, even that amount of heat was too much for the electronics that are part of such lamps. CF uses a Ballast and LED uses a Driver, very different apparatus. The heat buildup shortens the life of the Ballast or Driver. So those were not for enclosed fixtures. But I use the CF in some enclosed fixtures that are used for only short periods of time and given that lots of these lamps were freebies from the power companies (POCO), the service life is of less financial consideration. And minimum starting temperature is important for CF used in outdoor fixtures. I will continue to use the CF in some applications as long as my supply lasts. The supply may outlast me!
The CF units that are slow to come to full brightness are annoying to some users. But those units have the longer expected service life.
Now one of the POCOs I use just gave me some 9 watt A19 LEDs that are marked as suitable for use in enclosed fixtures.
For CF and LED, figure light output as being about equivalent to an incandescent of 6 times the wattage--thus a 9 watt Led has about the light output (lumens) of an incandescent of 54 watts. The manufacturer will probably post 60 watt equivalent.
Carefully note if use with dimmers is permissible. Unless specifically so stated, do not use with dimmers! Risky to do so!
Read the lamp package!!
Finally, buying fixtures that are originally LED is risky as repair parts generally will not be available for very long. The designs are typically proprietary, not interchangeable with others, and the manufacturer will soon move on to newer designs. At the present time it is better to buy fixtures that accept screw-in lamps.
 
Back
Top