MikeEyre74
Well-known member
Here’s that tractor I was posting about the other week. I finally got it home and figured out what the issue is. Here’s the machine:
https://flic.kr/p/2hPcv3Q
And here’s the issue:
https://flic.kr/p/2hPdsGr
As you can see, the crankcase had a bunch of water in it, and there is rust all over the inside of the cylinder on the right in this photo, which just bored. Rats!! The piston on the right with that top and the piston on the left was at the bottom, so that one on the left is OK, there was no contamination in the top end of the cylinders I don’t think. You can still rock the fly wheel through about 25% of its rotation over top dead center on the right side piston, and it feels OK there, so once I get this rust out, I should be able to spin the engine over. The problem is, how much damage is there to the cylinder? We’ll find out I guess...
https://flic.kr/p/2hPcv3Q
And here’s the issue:
https://flic.kr/p/2hPdsGr
As you can see, the crankcase had a bunch of water in it, and there is rust all over the inside of the cylinder on the right in this photo, which just bored. Rats!! The piston on the right with that top and the piston on the left was at the bottom, so that one on the left is OK, there was no contamination in the top end of the cylinders I don’t think. You can still rock the fly wheel through about 25% of its rotation over top dead center on the right side piston, and it feels OK there, so once I get this rust out, I should be able to spin the engine over. The problem is, how much damage is there to the cylinder? We’ll find out I guess...
