Metal Lathe ? Update

Grumpy

here are a couple more pics of the lathe.

One of the gears missing (nevermind the green and yellow in the back)
HPIM1334.jpg


One of the taper attachment not complete, this is the only part that I have of it. I have found a couple pics of one with it set up but what is the purpose of having one?
HPIM1332.jpg


And the last one is an over view of the back side of the lathe.
HPIM1336.jpg


Thanks Dave
 
Dave, First of all I don't think you will need the taper attatchment.It's kinda an advanced machinery thing. I spent 14 years as a machinest in the Navy and we rarely used it. You will do well just doing straight cuts and threading plus making bushings.. It looks like you need a double gear as you stated. not sure if this will be one peice or two separate gears. They will be splined either way so not to worry. Don't get me wrong, I don't mean to insult your abilities but there are few things you will need to taper. A few pulleys require the taper but as a general rule we amature machinests won't be cutting them unless you plan on making your own morse collets or special attatchments.. The book on top of the lathe should tell you enough to get started. lots of good info on the web also. You have a gem there but take your time :? :? and do lots of homework and she can do about everything you need. Any help I can be for you, just yell on here or feel free to PM me Grump. (if ya don't like the lathe we can get the Cub Express headed my way.) :roll: :roll: :roll:
 
grumpy":3fw9k5yy said:
Dave, First of all I don't think you will need the taper attatchment.It's kinda an advanced machinery thing. I spent 14 years as a machinest in the Navy and we rarely used it. You will do well just doing straight cuts and threading plus making bushings.. It looks like you need a double gear as you stated. not sure if this will be one peice or two separate gears. They will be splined either way so not to worry. Don't get me wrong, I don't mean to insult your abilities but there are few things you will need to taper. A few pulleys require the taper but as a general rule we amature machinests won't be cutting them unless you plan on making your own morse collets or special attatchments.. The book on top of the lathe should tell you enough to get started. lots of good info on the web also. You have a gem there but take your time :? :? and do lots of homework and she can do about everything you need. Any help I can be for you, just yell on here or feel free to PM me Grump. (if ya don't like the lathe we can get the Cub Express headed my way.) :roll: :roll: :roll:

Ps. the green and yellow in the background looks good to me :lol:
 
A good lathe is somthing I really want to get. When I was a kid my favrite machine was a amco brake lathe. I just love waching a drim or rotor bieng cleaned up. I am crazy but I have fun :wink: I would like to get a south bend lathe like we used to have at the shop. I did just spend just dollars short of 6,000 on a jig grinder I do not know what it does (I know Phil does) But it looks neat. It was my brothers money and for my brother but he said he will teach me how to do what ever it does.

Billy
 
Grumpy

The way that it is set up right now will work for me. The only thing that I will try and get right off is a QC tool holder. That would make things a lot easier. Then maybe a rest and a few other pieces.

Please don't think that you are insulting me, I am always open to what people have to say, that way I can learn from your thoughts. I had no idea what a taper attachment was so I was trying to find out if that would be something that I should have or not. As I can see right now the way that it is set up I will be fine. However should I spot a deal on one I will know what it is.

And the green really isn't a bad thing since that is what got me into the classic tractors 8) .

Thanks Dave
 
To get the "circular pitch" (distance from center to center of teeth measured on the pitch circle) .........
Divide the outside diameter by .3183 and the number of teeth plus 2 .....
P = ___D___
.3183 (N + 2)
 
dirt devil":l6dz9xag said:
Here is another question how would I figure the pitch of my gears needed?

THanks Dave

Why not describe your problem to the folks at Boston Gear? They probably have a few people who know exactly what you need. :D
 
This is true and I was going to try and talk to someone that could help me. I just wanted to get some more info before I called up and asked questions with out any information to offer them so that they can help me.

However I did talk to a local machinist about making me a set of gears. Brought him the dimentions and then as we were talking he remembered that his lathe had spare gears and looked at them. They have the same pitch as the ones needed and they are the right tooth count. So I got the part number and called MSC and ordered the gears as a hope they would work. Well I got them in the mail today one was $38.00 and the other a wopping $1.88. They both have a shoulder that needs to be taken off, as a matter a fact I did that tonight with the lathe. Now all I need to do is make a bushing for them to fit the smaller shaft. I lined the gears up and everything looks like it will fit fine once I get the bushing made and into place.

I admit that once this is done this would be the cheapest part of the whole thing. I have been looking at things that I would like to get for the lathe and I am well over the purchase price by at least 2 times.

Again thanks for all of the replys as they all help point me in the right direction.

Dave
 
Just wanted to give a quick update and say that I have built the bushing and now I can cut threads 8) :D :shock: :lol: . If I get a chance tomorrow I will post some pics.

Dave
 
Back
Top