Good evening!
I've got a Kubota B7100 with a 1630 loader that abruptly lost hydraulics a few week ago. One second it was working fine, absolutely nothing the next. No loader function, no 3 point movement, nothing. After tinkering around for a bit (several hours including a fluid change and cleaning the filter), a neighbor revved it to a very high RPM and everything's been fine since. I'm fairly certain that a piece of debris was holding the relief valve open and the higher RPM put out enough flow to open it further and flush it out.
I have also had an odd string of hoses failing this year. 6 total, commonly when I wasn't doing any hard work with the loader. One was while doing a bunch of rototilling when the loader hadn't moved in a couple hours. The hoses are probably pretty old (I've only had it for a couple years), but it's been very well kept indoors and they have very little visible wear.
My question comes back to the relief valve. Although I originally thought that a piece of debris was holding it open until the higher flow dislodged it, I'm wondering if it is gunked up/worn/rusted/etc and just isn't moving freely. If it has also been sticking closed, the higher than normal pressure may be contributing to my hose issues. Is it possible for a relief valve to stick like that on a well running/maintained tractor? If so, would it just be a matter of pulling it and cleaning everything up?
I'm very open to any other explanations. There's a good chance that the hoses are all just reaching their end, but I'd like to track down any gremlins before something bigger than a hose goes!
Thanks!
I've got a Kubota B7100 with a 1630 loader that abruptly lost hydraulics a few week ago. One second it was working fine, absolutely nothing the next. No loader function, no 3 point movement, nothing. After tinkering around for a bit (several hours including a fluid change and cleaning the filter), a neighbor revved it to a very high RPM and everything's been fine since. I'm fairly certain that a piece of debris was holding the relief valve open and the higher RPM put out enough flow to open it further and flush it out.
I have also had an odd string of hoses failing this year. 6 total, commonly when I wasn't doing any hard work with the loader. One was while doing a bunch of rototilling when the loader hadn't moved in a couple hours. The hoses are probably pretty old (I've only had it for a couple years), but it's been very well kept indoors and they have very little visible wear.
My question comes back to the relief valve. Although I originally thought that a piece of debris was holding it open until the higher flow dislodged it, I'm wondering if it is gunked up/worn/rusted/etc and just isn't moving freely. If it has also been sticking closed, the higher than normal pressure may be contributing to my hose issues. Is it possible for a relief valve to stick like that on a well running/maintained tractor? If so, would it just be a matter of pulling it and cleaning everything up?
I'm very open to any other explanations. There's a good chance that the hoses are all just reaching their end, but I'd like to track down any gremlins before something bigger than a hose goes!
Thanks!