If anyone is interested

Jack fowler

501 Club
The place I work at rents, leases and sells Ford and G.M. products. The other day a gentleman came in and wanted to compare the underneath (drivetrain) of the new Chevrolet Silverado vs. Ford F-150 with towing capacity of 10,500 lbs. At the time, I was working on a new style Silverado so management pulled a new 150 in on the lift next to me.

The gentleman came into the shop and examined both the trucks and apologized to me for my inconvenience to assist him. He said they all look so pretty on top, but he wanted to see what was underneath. He explained, he was going to retire soon and wanted something he thought that would last because he and his wife were going to pull an R.V.trailer probably for the next five years through out the U.S. and Canada.

To make the gentleman feel more at ease, I said “I thought it was a great idea” of his request to inspect both products. I assist him as much as possible and he said he was going to a Dodge dealer and request the same thing before he would make his decision.

One of my job duties is quality assist with General Motors engineers. I have a camera with me at all times so when a quality issue appears on a GM product I address it by pictures and reports to engineering. So when both trucks were side by side I took a photo opportunity to take some pictures. If anybody is interested… here they are, but I wish I would have taken more, some didn’t come out very well and had to be deleted. Both trucks have gas engines; Chevy. 5.3 L, Ford 5.4 L, 4 wheel drive with the 10,500 towing package.

Chevy first:

Engine area:

http://img.photobucket.com/albums/v688/Jackf/MVC-283F.jpg

http://img.photobucket.com/albums/v688/Jackf/MVC-281F.jpg

http://img.photobucket.com/albums/v688/Jackf/MVC-282F.jpg

Pull hook is in the middle of the bumper now. (Good idea.)

http://img.photobucket.com/albums/v688/Jackf/MVC-279F.jpg

Front skid plate:

http://img.photobucket.com/albums/v688/Jackf/MVC-277F.jpg

Suspension, Frame, transmission, final drive and ect.

Notice no more torsion bar front suspension:

http://img.photobucket.com/albums/v688/Jackf/MVC-276F.jpg

http://img.photobucket.com/albums/v688/Jackf/MVC-271F.jpg

http://img.photobucket.com/albums/v688/Jackf/MVC-270F.jpg

http://img.photobucket.com/albums/v688/Jackf/MVC-275F.jpg

http://img.photobucket.com/albums/v688/Jackf/MVC-273F.jpg

http://img.photobucket.com/albums/v688/Jackf/MVC-272F.jpg


Ford:

Engine area:

http://img.photobucket.com/albums/v688/Jackf/MVC-001F.jpg

http://img.photobucket.com/albums/v688/Jackf/MVC-003F.jpg

Suspension, Frame, transmission, final drive and ect.

http://img.photobucket.com/albums/v688/Jackf/MVC-014F.jpg

http://img.photobucket.com/albums/v688/Jackf/MVC-013F.jpg

http://img.photobucket.com/albums/v688/Jackf/MVC-011F.jpg

http://img.photobucket.com/albums/v688/Jackf/MVC-010F.jpg

http://img.photobucket.com/albums/v688/Jackf/MVC-009F.jpg

http://img.photobucket.com/albums/v688/Jackf/MVC-008F.jpg

http://img.photobucket.com/albums/v688/Jackf/MVC-006F.jpg
 
Jack,

Since you work on both brands, the logical question is, from a maintainer's standpoint, which do you think is the better truck?
 
Don,

That’s a hard one to answer on my part, working on Chevrolets most of my life. I guess I can say what I see day to day. First Fords are hard for me to work on. The people where I work at, that has worked on Fords most of their life say the contrary. The older (CK) Chevy’s had issues, but held up pretty good. On maintenance standpoints; the new Chevy that just came out… I can’t say too much about. It’s a very sophisticated truck with as much as twenty six on board modules talking to each other. The older truck had transmission, front end and some engine problems which were on the 8.1 liter. Transmission issues were because of lack of maintenance on the owners part I think, front end maybe a factory issue, but most of the time the owner was overloading the truck. The 8.1 was an oil burner because of head design. That was resolved, but the 8.1 was discontinued on the new truck. The Chevy gets a little loose (rattles) in the body after a few miles. (Customer complaints)

I’ve only been working on Fords for about four years. As I said before I don’t like working on them, maybe it’s because I don’t know how. In this area of the country about two Fords are sold to one Chevy. Maintenance standpoints; I really don’t see that many Fords in the shop, at least for major things. I do know they lock tight everything together and when you try to take something apart it’s almost impossible. They even lock tight the radio antenna mast into its mounting plate. Fuel mileage is better on some models compared to Chevy. Some of the Fords I have driven seem to have more power than some of the Chevy’s. Ford requires oil change intervals closer together than Chevy’s. (More maintenance) There was an issue with front end tire wear but it was resolved quickly. Most of the construction companies around here use Fords, they say for maintenance reasons. I have to say; even if I’m not partial to them they are a very well built truck. I have personally driven an older style Ford truck with 225,000 miles on it and it was a very tight running truck.

On the other side of the coin, I have personally driven/owned a Chevy and Dodge truck(s) almost 500,000 miles with minimal maintenance. Both were very good trucks.

After reading what I just wrote, I guess my answer is as clear as mud.
 
I turned an E350 cargo into a small RV that sleeps two. It gets just less than 17 mpg in WV and 22 in Il. I think if I had it to do over I would use a Sprinter as my base vehicle. More toom, no need to raise the roof. Better fuel milage.

Richard
 
Back
Top