Ford 8N voltage identification

MilGunsmith

Well-known member
I am going to pick up my late Uncles 8N this weekend. The battery is missing and I know that it was used to brush hog the field this year. Any ideas on what to look for to identify if it's still 6V or converted to 12V? I need to start it to move. It is a side distributor.
 
1) Alternator Present? It still might be 6v so check further.
2) Look for a resistor on the coil power wire. No resistor hints at 6v.
3) Is the coil part # an internal resistor type?
3) Are the light bulbs 12v bulbs?
 
One big hint may be at the battery cables. Maybe a big red cable attaches to the tractor chassis and a black cable goes up to the starter?

(This one is a reach). :surrender: :hattip:
 
The above posts are on the money!! Another thing is to check and see if the Voltage Regualtor is hooked up. A sure hint that it is still 6V
 
Well it is a 6v, found the battery in the basement. It has a Sherman high-low in it. Has a bad gas tank. I need to get it home and decide what to do with it. Keep or sell.
 
Back
Top