Landreo,
In my opinion…. buying a ¾ Ton truck with 200,000 plus miles on it is a little scary. Do you know the history of the truck?
Before retirement I worked at a Chevy dealer that was taken over by a Ford dealer. I never did like Fords because they are hard for me to work on. After I was forced to be a Ford tech I had a job to replace an engine in a 2001 F150 not because of factory problems, but of customer abuse. To replace the engine it was easier for me to remove the cab and bed from the frame to do the job.
I have a friend who had a 2000 F250 5.4L he bought new. He is a carpenter and never was good about maintenance unless someone pointed it out to him. The truck was used as an truck and the only issues he had was lower ball joints ,one outer steering tie rod end and two ignition coils. He was scared of what he heard about the spark plugs so he never changed them. After 257,000 miles he traded the truck for a new one.
I can’t tell you any more than what everybody told you here except I had a job on a 4.6L one time (the same engine as a 5.4L) that had 125,000 on the sparks plugs to replace the spark plugs. One came out hard and I cleaned up the cylinder head spark plug threads and reassembled all spark plugs with anti- seize compound . After working on Fords (cars and trucks) for six years, I found they are built very well, drive especially smooth and their gas engines run a long time. ….. Did I say I don’t like Fords….