Farmall C-230 Mule Drive

ShawnAgne

ShawnAgne

501 Club
May have found a Farmall 200. Was wondering if anyone has dimensions or pictures of what the mule drive looks like. Have a Danco C3 mower that I could put on it but just need general idea of what they looked like. Woods L59 would work also.
 
There might be some info under the Resources link above. The old system had some WOODS information but I've not looked since the new system came on line. Stan
 
Not mine but pix I had saved. The fast hitch would change the connection points on yours but these pix might help.


C_72 belly mower4.jpg


353773390_6725136387531406_1832281719059155052_n.jpg

353792285_6723706701007708_3018180050981891267_n.jpg

354057120_6723707667674278_8325527188397116700_n.jpg


354249574_6723712337673811_3709405152404084301_n.jpg354255097_6723711201007258_2052347908174585100_n.jpg

354436778_6725135264198185_5385561031541113493_n.jpg

354251811_6723719161006462_181260528794241280_n.jpg
 
My Super C with fast hitch. You can see there's more in the way but might give you something to think about.


7E1CD15B-72ED-47E3-8AE1-907411E0E851.JPG6A9A40DA-FDD4-49F9-9677-0842F7B41D2E.JPG
 
Yeah looks like I'd either need to pull it off or have it Infront of me so could make something that fits around it. I've emailed JP's and Burch to see if they have or know of anyplace that has one. Also talked to Hazel where I'm getting the tractor their hooked up with their local collects association. She said they may be able to find one.
 
MM-TX said:
My Super C with fast hitch. You can see there's more in the way but might give you something to think abou
Click to expand...

MM-TX said:
My Super C with fast hitch. You can see there's more in the way but might give you something to think about.


View attachment 73005View attachment 73006
Click to expand...
Just looking at it again. Wondering if I would fab a hybrid C/H mule drive if that would work. Doesn't look like I'll be able to use the big fly wheel that the H uses off the center but thinking if I mount it that way but then have pulleys off the side like the C it may work. I'll have to wait till I have it home to look at it. Does the rockshaft on the right side carry any of the weight or necessary for the fast hitch if it is fixed? Going to need that for the mower to raise/lower.
 
ShawnAgne said:
Just looking at it again. Wondering if I would fab a hybrid C/H mule drive if that would work. Doesn't look like I'll be able to use the big fly wheel that the H uses off the center but thinking if I mount it that way but then have pulleys off the side like the C it may work. I'll have to wait till I have it home to look at it. Does the rockshaft on the right side carry any of the weight or necessary for the fast hitch if it is fixed? Going to need that for the mower to raise/lower.
Click to expand...

The rockshaft on the right has a bar to use draft control. My Cub with C-60 the hydraulics don't work so the chain is stationary so I just set it at a set length. The guide wheels ride over ruts. I think would use the angle gear drive and try to make the mule drive support mount to right axle and trans. Maybe you can find some C/200-240 axle clamps to start with.

20240706103758-d940fe1b.jpg

IMG_1028.jpg

513DF9C8-2480-4AAC-9AED-9A8CB1B028D3.JPG

DSCF0044_19.png
 
Do you have a picture of how the beam attached to the mower deck mounts into the fast hitch? So you are just working the fast hitch to raise and lower the deck?
 
ShawnAgne said:
Do you have a picture of how the beam attached to the mower deck mounts into the fast hitch? So you are just working the fast hitch to raise and lower the deck?
Click to expand...
IMG_2571.jpeg
That picture was deceptive. It was a 3 point mower that I never could mount because everything was in the way of itself.
 
tst said:
what about a fast hitch mower deck seeing how you have one?, one that runs off the pto on a driveshaft for instance a L59 type ?
or look at tractor house, several auctions with mowers like this

Pardon Our Interruption

www.tractorhouse.com
Click to expand...

I've never seen a 2 point fast hitch belly mower. That would be slick, I would like to have one. I have an older Continental Belton KTR 60 3 point belly mower PTO driven. Using Fast hitch to 3point prongs I never could get mine to mount on my Super C because the 2 point hangs down too low and is in the way of the center beam of the mower. Also with that set up you can't offset the mower deck.
 
You must log in or register to reply here.
Back
Top