engine stand

Joey

501 Club
I just bought a used engine off of a Farmall H from the scrap yard and need to mount it on an engine stand to work on it. My question is, which configuration of engine stand do you recommend (T,H,A or U) and which do you shy away from? Any tips on how to mount the engine to the stand? I've never done any kind of engine work and that H engine is one heavy @#$%*&!
 
Engine stands are universal. Meaning they have adjustable arms to adapt to the configuration of the bolt holes on a particular engine.

The usual method of mounting an engine to the stand is elevate the engine with the flywheel end towards the engine stand. Then adjusting the arms and using spacers attach (bolt) the engine to the stand. Flywheel off the engine before mounting.

Quality engine stands are expensive. And you will need a heavy duty engine stand. Next item you will require is something to lift and move around the engine such as a shop crane. I'm pointing out the expense of purchasing shop tools - specially if this is going to be a one engine overhaul. The cost of a quality engine stand and shop crane would come in just under the cost of having the engine rebuilt and mounted in the tractor by an experience mechanic.

Next issue. The engine in an H has sleeves. If the crankshaft is still good the engine can be almost 100% overhauled without removing it from the tractor.
 
Back
Top