engine replacement

Joey

501 Club
I have to change the engine on my 1999 Camry LE (2.2L). Anybody out there have experience with this, done this recently, have any suggestions or advice? I've been doing research and found tons of info on the internet, but a lot of these things contradict one another! Some say this is good, others say don't touch it with a ten foot pole!

I'll welcome any comments. Thanks!!
 
These "newer" cars (anything above 1985) are a bear to work on and info is not correct for most of them,---thats the way the car makers "force" you to take them to the dealers shop for repair!--It's called "job security"--also most newer cars were made as "throw-away types" thanks; sonny
 
I didn't realize how much I was ignorant about my car. Spent the past week researching on the internet about the type of engine in my car and of the various engines made by Toyota. Read up on a few forums about the experiences and suggestions by other Toyota owners. Found tons of websites offering both rebuilt and used engines (US and Japan markets). However, who do you trust? :( Are the claims on the internet true? I like to buy something that I have seen. When that's not possible, I like to personally talk to someone about their purchase or experience.

Speaking of other forums, some of them were.......well, stupid is probably the best word I'm looking for. When a person asked for help, several forum members ganged up on him/her insulting their intelligence, trying to show how knowledgeable they were. Very few people actually offered help or advice. Made me mad as hell. :evil: It makes me appreciate this forum - just some good, down to earth folks who treat people like people. I figured if I need good advice, I'll get it here. :wink:

Well, I've got it off my chest and I'll get off the soapbox. Guess I'll go back to school again (on the internet)!
 
I know the feeling!!---Have you looked at the Hayne's manuals?---I have been using them for Chevy S-10, Ford ranger, F-150, and Escort!--they seem to be accurate on their info as to the "how to" stuff!----they cover a wide range of different brands and most all repairs of them! thanks; sonny
 
I have a Hayne's manual and it gives good information. However, I don't have the time, nor all the tools that will be needed for this job. Time is not a luxury.......aw, heck, the problem is my wife says I NEED THIS CAR NOW!! :shock:

Comparing prices, it's just as much to rebuild the engine as it is to drop another one in it, but rebuilding will take at least 2 weeks or more. Gotta go with another engine. Got a couple of leads, but I want to get a couple more opinions.
 
I just did this two months ago. I don't know your experience level but I have a fair amount of time under the hood. Primarily on old muscle cars of the Chevy persuasion. I felt confident going into this project, but halfway......I wish I had gotten someone else to do it. :( This is a Toyota Celica with a 2.2 with a manual tranny. Just to change the clutch assembly, the entire driver side drive train had to come out, crossmember removed........and the rear motor mount which attached to the crossmember was an absolute bear! You have to have hands the size of a three year old to get in there to get maybe two fingers on a wrench. :twisted: Three of the four motor mounts had to be removed. I nearly drove a wrench through the radiator taking the front motor mount out. I finally got it out, replaced with new stuff, and got it all back together. But....I don't think i'll be doing that again anytime soon. Have a look at this mess.
http://photos.cubfest.com/displayimage.php?album=lastupby&cat=0&pos=0&uid=314
 
Hi Joey,

I have a couple of ideas for you on your Camry engine problem.

1. Check with the service department of your local toyota dealer to see if they have any factory service bulletins on that particular engine related to excessive sludge build-up causing premature failure. If your engine and year model are in the program, you might get a replacement engine courtesy of Toyota. My former son-in-law (that dastardly you-know-what who cheated on my sweet innocent daughter! :evil: ), was a tech with Toyota, and he did a bunch of these replacements for folks under this program.

2. Failing that, do a Google search for used Japanese import engines. Japan has very tough emission standards that make it less costly for many owners to replace their engines after about 50,000 miles. I've used these engines in several cars, and they're a good inexpensive way to get a daily driver back on the road on a budget. Usually available through independent repair shops.

Hope this helps, and good luck!

Corky
 
Harold:

No matter how good I think I could be with a wrench, I'm going to save it for playing with the tractors. I think this is above my head and you've just confirmed my suspicions.

Corky:

I've check into the sludge problem and I don't qualify because I'm not the original purchaser of the car - can't produce maintenance records from previous ownership and plus, the sign up date expired in March, 2007. That was part of the schooling - ran across that on the internet. I'm currently looking at a JDM engine from Tennessee and a rebuilt engine from a local shop. Couple more phone calls and I'm in business. :)
 
Back
Top