Easter in Dieppe

Rudi

501 Club
This is what we woke up to this morning. I guess it is time to go get Ellie!
We have a winter storm warning, heavy winds, blowing snow and -2 or about 21F I guess.
If I get pics of some seat time, I will post them as well.

Easter%202007-01.jpg

Easter%202007-02.jpg

Easter%202007-03.jpg

Easter%202007-04.jpg

Easter%202007-05.jpg

Easter%202007-06.jpg

Easter%202007-07.jpg
 
Rudi,

That's the storm that was in our yards for several days. Now it's in your yard........ :D

Still cold and snowing here. :x
 
Bob:

Certainly is. It used to be a mom and pop operation.. was supposed to go away about 15 years ago.. Never did. Went from 100,000bf/annum to 5,000,000 or so now. The smell is nice and I love the smell of fresh cut SPF - what woodworker doesn't :?: :oops: :roll: :oops: and I guess here is where I get on my
SoapBox.gif
:!: So please forgive me in advance.. :lol: That is the famous Lakeburn Lumber that is next door to us. It actually used to belong to Em's Aunt Elda's brother Eduard. She is a sweetie.. but he is a .......... well let's not go there ok.... :roll: :cry: :? :oops: :roll: :!: They are very poor Environmental Stewards as they never clean up their sawdust and stuff so it blows around gets into my pond and all over my land.

However, this is one of the operations that generated such an interest for me not so much in Good Environmental Stewardship.. but more as an activist when it comes to utilizing all of the byproducts from a lumber mill.

Currently, they burn some of the sawdust, bark and mill ends, but most of it gets hauled up the road - right beside my road and they now have about 10 acres of this stuff 40 feet deep... Some day it will be great compost, but right not it is a massive waste of good material that could be utilized in particleboard, flakeboard, mdf, OSB, Kraft and other pulp operations partially voiding the practice of hogging fresh hardwood/softwood for these operations. Also, the bark could be hogged down to mulch size quite easily, they already have the equipment. Right now many of the landscapers in my area have to go to Nova Scotia to get good bark mulch.. which is a shame as much of their needs could be fulfilled locally from this mill and a few others in the area.

That would be a good example of proper Environmental Stewardship.. but to Em's cousin who runs the mill -- well let's just say that is about 40 levels above his Pay/IQ grade level :roll: :wink: :shock: :lol: :lol: :lol:
 
The saw mills in this area have very little to no waste. The saw dust is blown into the back of semitrailers and is sold at another location.

Just curious as to why the saw mill owners do not market their current waste.

Next question. There is a trolley in several pictures. What is the prupose of the trolley?

Eugene
 
23??? wow. Not quite that bad here - JUST over freezing. But you're right, we did at least have sunshine. that was nice :D
 
Rudi,
I bought a one-ton pallet of "Bio Bricks" this fall to burn along with the oak, maple, and birch that I scrounge.
I was able to get the one ton pallet for $210. A full pallet is supposedly equivelant to 1 1/2 cord of hardwood. I believe it. They burn hot so I can turn the air way down. They use the stuff leftover from sawmills.
Check it out:
http://www.biopellet.net
They are made right here in Connecticut.
Peter

p.s. Nice snowstorm for Easter!
 
Eugene:

Funny you should say that. Most of the mills that I have seen in many places actually do recycle all their waste. The former owners of this mill owned a trucking company and the reason they bought it was to utilize their tractor trailers hauling sawdust and chips to other sites for use as hog fuel etc. Unfortunately they don't haul the stuff to be used for by-product use.. The new owners own a window plant and much of their production if for their own consumption. They do offer custom kiln-drying as well.

In either case.. the mill manager is the son of the original owner - Eduard and his name btw is also Eugene.. :roll: :? :!: :lol: :lol: and he has yet to see fit to take any advice on utilizing the waste -- costs too much as far as he is concerned.

In NB we have a government that ensured every one could access the information super highspeed highway.. but when it comes to environmental concerns.. there is no law that forces companies like this to utilize efficiently all of their by-products such as sawdust, mill ends and chips. They do however assist large companies such as Fraser and Weyerhauser and Georgia Pacific in CUTTING trees for hogging into paper.

Now you can see why I am such an opponent of the Softwood Lumber dispute. I sure wish we could force em, but I have way too many issues right now to take that one on. Oh I don't want to go any father.. last time I took these yokels on, I ended up getting sued and abused in court over their inability to successfuly abide by a lawful contract.

Anyways.. not everything is perfect in the state of New Brunswick.

Trolley :?: :?: :?:

Oh do you mean my clothes line :?: :?:

Em is not a big fan of the dryer in the summer when she can set stuff out on the line and get that fresh air scent. Course, we have to hope there are no trucks running down the driveway or the wind isn't blowing from the mill.. and it is a bird suet feeder that is blowin in the wind there..

Peter:

I am some glad I have my own wood lot. I even burn my bark.... at $120.00US a ton that is awful expensive. It costs me about $100.00 Cdn a year to heat my house -- about $25.00/cord of wood if I use 4 cords. Honestly, that is what it costs me. So far I haven't quite used 4 cords and I have 33,000 cubic feet to heat and it does get cold up here. I burn a mix of hard and softwoods.. so I get a pretty decent heat from the wood in the wood room. My woodroom is 12x14x10.5 feet. I can store about 10 cords of wood if need be at 8 foot high. About 13 if I go to the ceiling but that is not required. And I have a 4x4x8 foot kindling box. 1 cord of kindling which is usually cut-offs or mill ends from my shop. I have never run out yet.. this year is the first year that I have even come close to scraping the bottom and I did that on purpose to clean out the older stuff..

At one time many years ago.. they used to sell the sawdust to the local families around here quite cheaply. A number of them used sawdust furnaces.. and some even used sawdust bricks.. but the fire marshal put paid to that about 20 years ago. Way too dangerous, as many would store sawdust loose in the basement.. bricks or pellets is much smarter, but a lot more expensive.

The pellets are a good idea provided that those who manufacture them actually use ONLY by-products from other mills and do not hog up logs themselves, because then that is a waste.
 
My last employer recycled paper, cardboard and plastic wrap. The recycling actually cost the company money - was not a money maker. Where the company made up for the recycling cost was money saved is not having to pay the disposal costs - fees.

It appears to me that the mills waste could be utilized in a "value added" product such as packaged mulch or wood stove pellets. It would take an investment in machinery, people and marketing but could/should turn a profit for the company.

The turkey farms in this area use saw dust as bedding. Then when the barns are cleaned the manure and sawdust is composted and used as fertilizer.

There is a company outside Des Moines, Iowa that takes yard waste, storm damaged trees, etc. and composts it. Then sells the compost. Surprisingly enough this is a large operation commercial operation.

Eugene
 
Eugene:

We think along the same lines. I have been trying for years to get Eugene to use his brain and to become not only responsible but a leader in Green Mill Environments for a lack of a better description but refuses. He keeps harping on the fact it costs money. But if he actually looked at it, it would be a lot cheaper to market the stuff than to bury it.

I was on the Westmoreland Albert Solid Waste Provisional Committee, we were the ones who designed this state of the art Waste Recycling facility back in the late 80's. It is now diverting/recycling almost 80% of the tri-city and surrounding towns as far as an hour away weekly trash, and most of it is actually separated and then sold. The organics and small paper etc., are composted and they are producing Class A soil amendments - humous basically. Quality stuff. The Tri-Community has a Solid Waste Treatment Plant for our sewage, although it is not perfect and there still is some dumping.. the solids and some other materials are separated, they are also treated and composted and have been now demonstrated as being the only material that has successfully remediated the old firing ranges at CFB Gagetown. This is a firing range for heavy artillery, tanks and other munitions carriers/launchers and is heavily polluted with cordite and other munitions waste. They have been trying for 20 years to remediate this site and it is finally done.

As an aside the International Solid Waste Conference is here in Moncton this year, so that should be somewhat interesting.

I agree with you, there should be some value added components to their operation.. but there isn't. The one thing they do is sell some of their sawdust, it probably amounts to 1% or less to the local chicken farms, horse ranches and dairy/beef operations, but it isn't a whole heck of a lot.

Oh well.. c'est la vie :!:
 
Charles:

One has an underslung exhaust and the other one has a cap of sorts.. she is ok. Nice catch :!:
 
Back
Top