Could yall help me with a thing for school?

TractorChick

Well-known member
For our drafting class, Josh and I are making a nuematic golfball launcher. We are in need of an "expert" for our project. We will have ten questions and we need the expert to answer so we can get the points for our project. We would appreciate it greatly!!!! Let me know. Thanks so much!!!!!
Amanda
 
Spud gun type of machine. Used to have the junior high kids make paper rockets to launch from a spud-gun. The paper rockets would go about 100 yards on 60 psi.

Basically it is/was a pvc tube that the golf ball will fit inside with a bit of wadding on the golf ball. For an air tank I used a large PVC union (capped on both ends) with a smaller T on one side. A PVC ball type shut off valve on the tube. One end of the air tank cap was drilled to fit a tubless tire valve stem. The "gun" was mounted in a wooden cradle.

You might want to use schedule 80 PVC for shooting golf balls. If you are taking a welding class you could use steel tubing.

I sent someone on this board plans for the rocket launcher. I'll have to look around to see if I still have the plans. The designer of the rocket launcher was a Mr. Walker. Perhaps the plans are on the internet.
 
No problem with welding for Amanda, if i remember right she was giving some one lessons a while back. Eugene has a good idea. You really want to blow their mind put a pressure relief valve on it too.
A number of years ago my cousin Eugene (really a coincidence of names) made a demonstration of something that used steam for a science fair in High school. I objected to the fire needed for steam in a school building and he modified it to use compressed air. Compressed air will run steam engines and no fire. I also insisted he install a safety pressure blow off as well as a pressure gauge. When he had it completed he and his father brought it to my place where we filled it with water and then put air pressure it till the safety operated. With the water if there were a rupture there would not be the explosion all air would create. Gene then engraved a brass plate "Hydro static tested with the date". Marsh & McLennon the insurance Co was one of the Judges. They blew a fit till their guy read the Hydro test plaque. Marsh was not one of the listed prizes but they created an award and cash prize for the safety shown.
 
On the safety issue. The school shop was plumbed for compressed air. Prior to the middle school classes I would set the pressure regulator at 60 psi. Then locked the door to the room containing the air compressor.

If you plan on building your designed project - word of caution. Shooting a projectile/golf ball out of a cannon could be lethal.
 
Back
Top