concrete sealer

Friend of mine just poured a 40 x40 concrete slab and wants to put a sealer on it. Can any one tell me of some good sealers to use. He does not want to have all those oil spots when motor home, tractor,truck etc drips oil. This is not so much for looks as it is so he can wipe the oil up.
 
Depends on the sealer, Bob. I have a call in to the guy who did my shed floor to see what brand he used. I like it a lot.
 
Bob McCarty":1gs39v4o said:
This isn't an answer to your question, but I believe the concrete has to cure for "months" before sealing.

Bob
The guy who did my floor left the sprayer and told me to coat it the next morning. I don't remember the brand he used.
 
When I did the first part of my barn, the contractor refered me to a concrete/masonry supply company. He just said to ask for concrete sealer and get a 5 gallon bucket of whatever the guy recommended (42x48). He sold me a product called Sonneborn "Kure-n-Seal". I put it on with a garden sprayer and used very close to the full 5 galons. Be sure the area is well ventilated.

After hearing everyone talk about how great a painted concrete floor is, I decided to use a common concrete floor paint when I added onto the barn. I should have stuck with the "Kure-n-Seal". The paint has never been as good for a whole list of reasons. I did not use a 2 part epoxy paint. Maybe if I had, it would have been OK. But if I have the choice again, I'll go back to the sealer.
 
I have tried the epoxy, and it simply isn't as good as I wished. I wish that I would have just sealed my barn so that It would last longer. I have a lot of areas where the epoxy is coming up. It looks worse than when I started! Stay with the sealer. Also, if I wanted to find a contractor to help with some other issues on this floor, who would you suggest. Has anyone used Angie's List?
 
For new concrete, the sealers suggested above are great and should be applied as soon as possible after the floor is finished.
An old sealing method is to use Boiled linseed oil and varsol (or other thinner) mixed about 50/50 and apply it in thin coats. It is very slow to dry and may remain tacky for several days. Raw linseed oil is not a good choice as it may never dry. Don't use gasoline as thinner as some of the older books suggest, far too dangerous. This is probably the best thing to use on old concrete that may be powdering on the surface. The linseed oil will not interfere with bonding of most paints.
 
Back
Top