Any 7.3 ford powerstroke diesel tips?

cowboy

501 Club
Hi Guy's

I just got a used 1999 F-250 4x4 crew cab long box.
It has 120,000 miles on the dash. Its not really cold yet and it starts hard and smokes for five or ten minutes after starting. I was told when I got it it needed new O ring on a injector. Rick said the preheater system may not be working.

I just want to go through it and make it reliable. I am thinking on having new injectors put in and was wondering if their is a better performance injector. Also I want to put a programmer box in it where I can change it on the fly from ecomany to power. depending on whether I am pulling with it or not.

Any suggestions on injecters or program box are very welcome. I have no idea what is avabile for this engine and truck. But I want to go through it now and get it fixed up to the best I can now. Rather than fixing one thing at a time.

Thanks

Billy

IMG_1146.JPG


IMG_1147.JPG


Notice its close to the same color as Bigdog's truck. Mabe if I pull a Big job everyone will think its Bigdog :?:
 
Billy,

I have the same truck only black with 330,000 miles on it and still going strong. The starting problem could be the relay for the glow plugs. It's located right in the center of the engine on top, easy to get to. If you see signs of heating or burning on it you should replace it. Easy fix and not too much $$$$.
As Bronson suggested do a search, there are tons of things out there for that engine.
8)
 
Thanks Don

All summer I have been driving a ford festiva that would fit in the box of this truck with room to spare. Its hard going from 45 mpg to 15 mpg. But the truck is a pleasure to drive.

HI JB Thanks

Kevin works at a ford dealer and I am shure he will have some good ideas for me.

Howdy Donny

Great to hear from ya. And that the truck has the possibilty of running that long :D I am shure it needs new fuel filters and a oil change. Need to find out what the winter weight oil for it is. Thanks

Billy
 
Cowboy - don't you go sullying my reputation now son! :lol: :lol: :lol:
Good lookin' truck - for a Ford......
 
Hey Billy, that's a mighty perdy truck! Looks like someone took good care of it.

From what I've been reading on the diesel truck forums, there are reasons why all the manufacturers limit the power output of their diesel engines. Here's my take on hopping up the performance with a chip:

(+) side: A performance chip will give you gobs more power. Fuel mileage doesn't seem to suffer.

(-) side: Reliability. Extracting all that extra power radically shortens the engine and drivetrain life. Chips tend to create expensive maintenance headaches over time.

Others here may disagree with me. But those forum discussions lean heavily towards guys having problems after chipping versus those who leave it stock.
 
I used to work at a ford dealer.It closed last Thursday at 5:00.OH Well!!!As stated before,check the glow plug relay,Injectors would be real$$$$$ they probally only need o-rings and they are cheep.Ford dealer ask for them,package of 16.Try to find a good diesel tech,be lots of help or pm me,I know a few pretty good.How cold up there???You are in Mich right???They use 15w40 year round here in Ohio.Fl.1995 and 15 quarts of oil.USE GOOD OIL!!!!Might want to change the fuel filter also.Hope this helps.Kevin like I said PM any more questions!!! :twisted: :twisted: PS looks like an 8ft bed thats a looooong truck I like and how ya been??
 
Billy,
Nice Looking truck. In October I got a 2000 f250 7.3. I dont have any of the performance items yet nor does mine smoke on start up But I know DirtDevil dave has a 7.3 and has done a number of performance things to his. Hopefully he will see this and chime in. I am also wondering what some other people are using
Scott
 
Cowboy as everyone has stated I would look into the glow plug relay (about 25 bucks at napa Ford will charge around a 100) as I just did the same thing a couple weeks ago for my dad. We have two in the drive one's a 99 and the other is a 00. As far as chips I have a DP Tuner and love it, but if you want a chip you will need a bigger exhaust like 3 1/2" - 4" Downpipe and then 4" at least out to the back. You will want this to help keep the temps down with that new chip. You will also want to have a set of gauges that tell you your EGT's exhaust gas temps. depending on where you put the pyro depends on what temp to watch for. Post 12-1300 pre 1400-1500.

Now pricing you can figure on about 700-1200 for an exhuast depending on what flavor you pick, chip 300-500 depending on how many different levels of power, and gauges and mounts about 500 or less depending on which flavor and how many. The price I gave was based on 3 gauges, EGT, tranny, and boost. the three most common. Performance injectors I hope you are sitting down, anywhere from 2000-4500 again depending on your flavor. I have stock injectors with a chip and other supprting mods and don't see the need at this time to upgrade. If possible I would try and do the o-ring route this time. Also if you go for a chip with a hot program and you have an auto then you may want to look into a performance rebuilt tranny.

As far as places to get help you can check out a couple of my favs http://www.thedieselstop.com and http://www.powerstrokenation.com I will forwarn you that these are not the same nice and friendly folk that you deal with here and they do go for the throat often so once you get over that you are all set.

I have most of the things that you are looking for already other then the injectors installed on my truck and love it all but the price of the items got to way out of hand for me to keep up.

The things that I have listed are just a few that I can think of right now, I know that there are more but once you do some researching on the other boards you will find more questions and answers.

If there are any other questions feel free to ask.

Dave
 
Kevin sorry to hear about your layoff. Best wishes for you finding another job. Thanks for the info. I have about the same weather you do at your place.

Thank ya kindly Bigdog. Hope to see you at George's next month.

Hi Carl. Thank ya. Actually the truck is a little rougher than it looks. Its been through one wreck. I got it for $14,729.00 tax title plate out the door. And thats about as cheep as you can find one that will even run. So I don't mind putting some work into it. Actually I wanted the chip package for the econamny modes for when I am running around unloaded. With the price of fuel getting it all tuned up to get the best milage now seems like a good idea. I will find out how well it pulls a load when I come home from the UP with a load of firewood on my 18' trailer.

Thanks Scotty. I had to go 150 miles to pick it up. I drove a ford festiva out and brought it back on a tow bar. I love it come up to a hill it dosen't down shift just hear the turbo scroll up and keep on rolling. We have been pulling with my Dad's V6 F 150 and its always down shifting.

Thanks Dirt Devil. Thats what I was needing to know. I do not see the injectors being cost effective for me either. I knew I wanted a trans temp gage. I run bull dozers for a living and I know the trans always overheats before the engine. But I never heard of a EGT gage. Never had one on any piece of equipment I have ever run. Thanks a lot for all the prices and info. Now that I have an idea of what I can do I can start figuring out what I can afford.

Billy
 
Billy

You will find EGT gauges in trucks more then you will find them in equipment. Basically it is there to tell you to let up on the go pedel if you have the engine turned up or hauling something really heavy. So you won't melt the turbo.

My dad's '99 pulls real good for being bone stock. Although I always get enlisted for hualing home his tractors, but it has more to do with me being registered for the weight were he isn't.

I am sure that you will enjoy your truck very much as I do. I have 106700 miles and had a chip and gauges in it since 3500 miles.

The thing that gets me as I have a ton of money in yesterdays technology when new trucks of today can perform just as good if not better off of the lot then mine with all of the mods. I would have to sink another 4-6000 in mine to compete with the 08 Fords. But then mine wouldn't be paid for anymore and I would have to start modding all over again :(

Dave
 
Cowboy You may know an EGT gauge by its older name- Pyrometer it measures exhaust gas temp. at the turbo. Involves drilling a small hole in your exhaust pipe and installing a probe. I just saw an ad for a chip called an Econo- Chip (I think) $329, Cant remember where except it was on a Website. Do a Google for Diesel Manor in New Hampshire, Cheapest exhaust prices in the country. No tax and sometimes free shipping. Good Luck Frank
 
Wow Dave what a lot of reading ya set me up for :!: I need to find a better way to take notes and put them some where I can find them. Definely learned a lot. With a lot to go yet :!:

Thanks Bill lookin' forward to seeing ya agin.

Thanks Frank. A gage cluster is probally going to be my first upgrade.

This is a great site. Has picture tutoriols on changeing fuel filters. oil, trans oil, and a lot of other great stuff :!:

http://guzzle.rbmicro.com/index.html

Another little tid bit I found but never thought about.

I heard this elswhere but dismissed it as urban legend, but then time came for new brakes and Shazam! 2 MPG! My brakes were dragging.

Apparently these sintered metallic brakes we use corrode on the ends and swell as they do so. Once they swell beyond the normal clearance, they drag. MPG and other performace is degraded. And the brakes get hot.

A little file work will bring the pad ends back where they belong, I am told.

What I'm alerting everyone to is that otherwise A-OK brakes might be dragging on the edges. I don't give a rip what brand of brake pads you use.

Jack up you front wheels and give them a spin. They should spin freely. If they drag to a stop in less than five revolutions, pull the pads and file off the swelled edges some.

It is worth 2 MPG and will make your pads and rotors last longer.

Billy
 
Back
Top