another whats it

I don't know. But Herbrand featured automotive tools in the early years. They had a number of specialty wrenches for Model Ts, for example.
 
What would the lever work against? I like the answer, especially since I don't have one, but I question how it could be used to do it. Picture yourself trying to use it. I cannot unless it was bolted to something. Vern
 
Dale Shaw":1k5b00bc said:
It is for compressing the bead on a narrow tire.
Just to start an argument. I don't think so.

Hooks on the tongs face outward. Hooks to catch something - the action would then to open the item. Then there is a recess/catch/indent on the upper tong that appears to set on a stop.

I don't know what it is. My first thought was it was a set of ice tongs used by ice houses to pick up blocks of ice. Closer examination - not.
 
LOL
for the sake of the arguement, --those are rolled edges to keep the clamp from popping over the bead, once it is compressed.
 
The moveable jaws close as the lever is lifted. The edge of the jaws is really a flange that pushes inward against a length of the tire bead, not just a point. At least, that is how I see it.
In those days, fixing a flat was done by the occupant(s) of the car on the side of the road. Due to the poor roads and the poor tires, it was a frequent event.
One hand would be on the tire tread surface. That hand plus the weight of the tire and wheel would hold down while your other hand pulled up. And the wheel might not be removed from the car.
I have seen tractor rear tires changed and the wheel never removed from the tractor, just jacked up.
 
Used to keep the tire open to put a hot patch in tire where there is a torn place similar to modern vulcanizing :D Yall must have just bought new tires :lol: :lol:
 
It is for breaking narrow tires for sure. These work great on a flat tire on the side of the road. I have some experience with these, having owned over a dozen Model T's at one time, currently owning 8.
 
Boss, I have seen devices for holding the tire open as you described. But this one does not seem suited for that. it would have to be held with two hands to force the tire open.

And perhaps it is a bead breaker for narrow tires.
 
Tire spreader to allow easier access/working area inside the tire.
Handle's smooth on the top side only for pushing down to spread the bead.
 
farmallcub49":2veslnlf said:
It is for breaking narrow tires for sure. These work great on a flat tire on the side of the road. I have some experience with these, having owned over a dozen Model T's at one time, currently owning 8.
Andy, coming from a guy who has used them on his "T"s I gotta say I believe you on this one. I would never had been able to figure out what it was.
 
Looking at all the pics of the item, that is a clever tool that does it all. I see everything you'd need to remove, repair, and re-install the tire onto the rim. Everthing from popping the tire away from the rim, then using the spoon on the end of the handle to pop the tire over the rim. Once the tires removed, it then spreads the tire to repair it. To re-install the tire it has the clever feature on the side of the one jaw to pop the tire over the rim working it around the rim. I wonder if it'd work on the front cub tire? Rick
 
So, what do I win? :{_}: :{_}: :{_}:

Actually Rick wins, he explained it all.

Funny how we can have several answers and all be correct. Lets call it a "TIRE LEATHERMAN" :mrgreen:
 
I found a Herbrand tool (valve spring compressor?) at a yard sale once. The were made in Fremont OH.... spoke to GW about it quite a while back. Seems the newlywed Willers lived right down the street from the clanking factory. They made all kinds of tools back in the day. I just ran into another Herbrand tool cleaning the garage.
 
Back
Top