Another "Can you identify this ?"

spiveyman

501 Club
Good evening gents (ladies too :D ) ! Dad and I spent the weekend at the farm getting some work done. On the way home, we stopped by my grandma's to pick some muscadines and scuppernongs ( still just a little early, but we got a few :D ). We took the opportunity to also go through her storage buildings to get together some old tools. Dad has been looking for a couple in particular that he remembered my grandpa having, and I was just grabbing the old wrenches and screwdrivers no one was using to amass my own toolbox.

Anyways, long story short, one of the things we came across was this item. My grandpa really enjoyed going to auctions and bidding on unique and antique items. This item was on a shelf out of sight. At first glance, I thought it might be a meat grinder or possible kitchen food processor. Dad looked it over and seemed to think it was for shredding tobacco for personal use ( rolling your own cigarettes ). He thought this because if you look, the hole that the material would be pushed out of isn't real big. So what do you all think? There are no casting codes, letters, numbers, or anything on here that I can tell. It looks as though it may have been somewhat repaired under the lip of the mouth. I'm real curious to know what exactly this was used for because we sure dont have a clue !!! :roll: Thanks !

By the way, in case you cant tell it in the picture, both the top and bottom half of the unit have knives fixed into the back side.

More pictures here -> http://s102.photobucket.com/albums/m105 ... %20Device/


DSCN1790.jpg
 
Andrew I think Ole' Rick is correct on this one. Tobacco grinder is my guess ( answer ). :D :D :D :D Bringing it to Stonethrow :D ?
 
Mr Jim, after dad said tobacco grinder, I started to drop my guess of food processor/ meat grinder and side with him a little. His answer made some sense. However, Raymond also made a good point about a coffee grinder. I'm too tired to do any searching on the net right now, but maybe tomorrow if it isnt positively identified, I may try to look up old coffee and tobacco grinders. Thank you both for your help !!! :D

And Mr Jim - if it is indeed a coffee grinder, maybe it would be fun to bring to stonethrow and grind some coffee in the morning. Heck, maybe even brew the coffee in an iron kettle too ! We'll see I guess :wink:
 
Andrew, I did a search last night, and 90% of the coffee grinders didn't look like this. Most were lap versions or the wall mounted kind, but I did see a few that resembled this one in design. I also searched tobacco grinder but didn't find anything that came close. After thinking about it, maybe it could be used to grind or cut herb/spices??
 
Andrew, one of my buddies from work (happens to work at the Seneca, SC plant, and is a SC native) sent me the following, and I quote:

I have used one of those, if you look at the way the teeth are laid out , when you feed the corn in the top ....it causes the corn to turn as it shells the corn....it helps feed it thru.

And the reason for the door being on the front is in case a cob breaks off , you open the door to get it out.



He has no pictures, so I can't be sure, but for what it's worth. :lol:
 
Quite sure it is indeed a tobacco shredder. I've got one that has two counter-rotating gears that are sharpened to a knife edge where they come together, but this one was just a different design. Most of the old general stores had one of these mounted to the counter. They purchased their tobacco pressed into a square "loaf" about 2 by 3 inches and about 18 inches long. If you wanted chewing tobacco they would cut it with a cutter with a long handle and a guillotine knife that would cut a "plug" in 1/2 inch increments. If you wanted pipe or cigarette tobacco, they'd measure the plug and then drop it in the shredder and grind it into a small cotton drawstring bag. It was sold by the plug. That's why cigars were considered a luxury because they came already rolled.

Brings back memories of a simpler time.
 
Man, all kinds of ideas........Guess I'll have to sit down one day with tobacco, coffee, and nuts, etc and see just what it will do :lol: Mr Roy, this particular unit is quite small - I'm not so sure it was ever used for corn :? ......? Thanks again everyone, I appreciate the help !
 
Well I believe this link (below) will about do it for me - found this link a little while ago. Very close resemblance to our unit. I dare say our mystery device is a tobacco grinder............. :shock: I looked up coffee/nut grinders and like you said Raymond, I couldnt find a close match. I appreciate the help! I just wish now that I could date it. I'll double check for any casting marks, but at first glance I didnt see any :( Oh well - thanks again guys !

http://images.google.com/imgres?imgurl= ... n%26um%3D1
 
spiveyman":2ip9zftd said:
Man, all kinds of ideas........Guess I'll have to sit down one day with tobacco, coffee, and nuts, etc and see just what it will do :lol: Mr Roy, this particular unit is quite small - I'm not so sure it was ever used for corn :? ......? Thanks again everyone, I appreciate the help !

Andrew,
He emailed me back and said after studying the pictures, he is quite sure he was mistaken. I know it does not look like any corn sheller I have ever seen in person. It will be interesting to see someone finally correctly identify this machine. Personally, I think I'm siding with Flyawa and going with the tobacco shredder. :lol:
 
Andrew , you have gotten some good guestimations on its purpose , but how could anyone doubt Rick on this one. I am puzzled by that. :lol: :lol: :lol:
 
Ahh, a little persistence pays off (little luck, too! :lol: ) And as Jim said, Mr. Rick was "right on" on this one. :lol:





Andrew02.jpg


Andrew03.jpg


The handle is different, but for the most part I think it is the same machine.


Roy
 
Mr Roy - maybe the handle is slightly different, but I'd swear up and down that picture of yours is the exact same. I'm curious where you found that - I'd love to find any information on this model.

And Mr Jim, I hate to "doubt" dad on anything - he is right on about 97% of the time, but it is oh so sweet when he slips up and is wrong. My mom and I look for the opportunity to prove dad wrong. Those times are few and FAR between....... :roll:
 
Mr E, that is the same machine, so we'd love to know where you found those pictures. The reason our handle is different is because the wood part is missing, we just have the long bolt that went through the wood.

97% ain't bad, and i just let them get that other 3% because I know how demoralized they would be if I was NEVER wrong.... :)):

Thanks, Redfin, for sticking by my guns like that! :lol:
 
Rick Spivey":36mxts0t said:
Mr E, that is the same machine, so we'd love to know where you found those pictures. The reason our handle is different is because the wood part is missing, we just have the long bolt that went through the wood.

97% ain't bad, and i just let them get that other 3% because I know how demoralized they would be if I was NEVER wrong.... :)):

Thanks, Redfin, for sticking by my guns like that! :lol:

Rick,
This dad-gum link may not work correctly. I was going to place it in the original post, but it seems a bit tempermental.
http://www.worthpoint.com/worthopedia/antique-iron-tobacco-shredder

If you do not see additional pictures mid-page, then try doing a Google search for "tobacco shredder" without the quotes. Then click on "Antique Iron Tobacco Shredder" a little ways down the page. That is where I got the pics. I did not have time to do much research for details on the machine, but this should get you started. :{_}:

Can't wait to see you guys at Stonethrow. Beards, hats and all. :lol: :lol:
 
Rick Spivey":3ghuzgrz said:
Mr E, that is the same machine, so we'd love to know where you found those pictures. The reason our handle is different is because the wood part is missing, we just have the long bolt that went through the wood.

97% ain't bad, and i just let them get that other 3% because I know how demoralized they would be if I was NEVER wrong.... :)):

Thanks, Redfin, for sticking by my guns like that! :lol:


No problem Rick , I like to be on the winning side :D :D :D :D :D :D
 
Back
Top