Jeff Silvey
501 Club
Well I have a small shop but it fits my needs. Like anything flat its a catch all as we all know. I have one welding table with a vice. So thought I want a little smaller one a little taller so I didn't have to bend over.
30 x 30 x 3/16
44" tall with casters.
2 casters at the opening swivel. back 2 are stationary.
40" w/o casters.
2" tubing as legs & side braces.
2" flat stock as back brace.
I don't know why they wont post correctly.
30 x 30 x 3/16
44" tall with casters.
2 casters at the opening swivel. back 2 are stationary.
40" w/o casters.
2" tubing as legs & side braces.
2" flat stock as back brace.
I don't know why they wont post correctly.