3260 mower blade lengths

[Paul161]

PJ here, Just joined the site, I have a 154 and a 184 lowboy. The 154 has a woods mower and the 184 has a IH 3260 mower deck. Does anyone know the lengths of the three blades on the 3260 with one blade being longer?

 

[staninlowerAL]

PJ here, Just joined the site, I have a 154 and a 184 lowboy. The 154 has a woods mower and the 184 has a IH 3260 mower deck. Does anyone know the lengths of the three blades on the 3260 with one blade being longer?

Welcome to the Forum, suggest you contact Forum Sponsor Hamilton Bob. Link is at the bottom of the page. Specializes in Number Series Cubs. JMHO Stan

 

[tst]

woods mowers have the part # stamped in the blade, take one off and clean it up and probably will see it
The IH Danco mower blades are getting harder to fine lately
here are some cross over #s for them
CUB CADET 547191-R1

CUB CADET 759-3853

OREGON 91-318

PRIME LINE 7-04683

STENS 325-860

SUNBELT B1SB91318

WINDSOR 50-3215

IH 547191R1

IH 84521623

474154R1

Rotary 15-6078

• Troy-Bilt 759-3853

 

[staninlowerAL]

tst suggestion is your best approach. ID the blades part numbers and search for that. AMAZON has a set listed but it may or may not be correct given there is some mention of MTD in the listing. Messicks usually is a good place to look for part numbers. Stan

 

[Paul161]

Thank you, gents, for the information, much appreciated. PJ

 

[staninlowerAL]

Here's a bit more info from Messicks website that might be helpful. The full breakdown pdf file of spindle parts is on their website. Stan