Dusti Snider
501 Club
Just wanted to share my recent project. I know it's not red, but I've always felt that any old iron deserves to be taken care and put back to their former glory when appropriate. I know alot of you share the same sentiments. This tractor belongs to my employer, William D. Calfee Jr., "Mr. C" as we call him around here. It was purchased second hand by his father in the mid 1960's. My Calfee Sr. used the tractor for light haying and plowing duties on his small acerage. When Mr. Calfee Sr., passed away the tractor was put away in the barn where it remained for the next 14 years.
"Mr. C" has always kept the tractor because it belonged to his dad, but other than that had no real interest in it, his interest is street rods and Harley-Davidsons. When I went to work for his company he found out about my interst in antique tractors. Eventually he comissioned me with the restoration of his dad's tractor. It was because of Mr. C's kindness I was able to purchase the Farmall M last fall. Anyway in September of last year I spent a couple evenings tinkering around with it and got the ol' girl runnning. On September 25 of last year we hauled it to our house and the real work began.
The engine checked out well, and other than a valve adjustment, nothing else was required. We purchased new rear rims, and four new tires. All new gaskets and seals on the engine, transmission and hydraulic system. New wiring harness, switches, gauges, lights, and regulator. I rebuilt the starter, generator, and water pump. New hoses, clamps, belts and grease fittings. New steering wheel, knobs, seat cushions, and Jorde decals. It's not flawless, but it turned out real nice and I think he's pleased. The ol' girl will now be retired to his large garage where it'll spend time rubbin' hubs with Mustangs, Harley's, 40 Fords and 50 Fords. I'll get the added benefit of being able to show it and parade it whenever I want, plus be its caretaker and curator so to speak. It's been a blast and I'm grateful to Mr. C for allowing me the privledge. The next big success will be when his Mother see's the tractor at her house, probably one day next week.
So here it sits...after a large investment of money, over 150 manhours in nine months and almost 200 photographs and countless pages of notes...
"Mr. C" has always kept the tractor because it belonged to his dad, but other than that had no real interest in it, his interest is street rods and Harley-Davidsons. When I went to work for his company he found out about my interst in antique tractors. Eventually he comissioned me with the restoration of his dad's tractor. It was because of Mr. C's kindness I was able to purchase the Farmall M last fall. Anyway in September of last year I spent a couple evenings tinkering around with it and got the ol' girl runnning. On September 25 of last year we hauled it to our house and the real work began.
The engine checked out well, and other than a valve adjustment, nothing else was required. We purchased new rear rims, and four new tires. All new gaskets and seals on the engine, transmission and hydraulic system. New wiring harness, switches, gauges, lights, and regulator. I rebuilt the starter, generator, and water pump. New hoses, clamps, belts and grease fittings. New steering wheel, knobs, seat cushions, and Jorde decals. It's not flawless, but it turned out real nice and I think he's pleased. The ol' girl will now be retired to his large garage where it'll spend time rubbin' hubs with Mustangs, Harley's, 40 Fords and 50 Fords. I'll get the added benefit of being able to show it and parade it whenever I want, plus be its caretaker and curator so to speak. It's been a blast and I'm grateful to Mr. C for allowing me the privledge. The next big success will be when his Mother see's the tractor at her house, probably one day next week.
So here it sits...after a large investment of money, over 150 manhours in nine months and almost 200 photographs and countless pages of notes...