12' Double Gang Disc

  • Thread starter Thread starter Anonymous
  • Start date Start date
A

Anonymous

Guest
Found out the other day just how much drag a 12 footer is. It soaked most of my 60HP Deere 5400 to pull it. Got me to wondering if anyone has ever tried to pull a disc with a 4WD pickup and if so how did it work?
 
to much drag, you will be spinning wheels forever, even with 35 inch mud tires. don't ask.
but a truck with A/C is cheaper then a tractor
 
that JD must be a wimp. :lol: We pulled a 7 footer with the old Farmall H, and yes it was a load. the shortcoming to pulling it with a 4wd truck is the tire traction. Farm tractors have ag tires because of the traction provided in soft ground. If you want to pull it with a truck, some weight in rear, and as coarse treads as you can find will help. One problem will be speed, even in low range it will be difficult to keep speed down to the range disks are designed to run at. truck is capable of the low speed, but operators tend to get bored and get a heavy foot. Another consideration will be fuel economy, the truck will burn more fuel than a tractor, due to all the added gadgets, engine operating at low rpms, where it has very low torque, and wheel slippage.
 
The guy I borrowed this off of said it was all a 656 wanted and that is pretty close apples to apples. Initially I had some troubles over the plowed ground but it got better the second time around. The problem isn't power, its traction and the Deere weighs 9000lbs so it must have been a hard pull. Also the ground has everything to do with how something pulls. This is place we plowed last month. Every inch is full of poison ivy roots ad if you had seen what we put the Cubs through trying to plow it. One thing for sure a truck could not pull it the first time around as I was marginal on clearance with the Deere and I've got as much clearance as an H. Thats how rough this ground was. This was the first task I've put the Deer on that it didn't tackle with ease so I was surprised. Then I got to wondering about how well a truck could do pulling a 12' disc.
 
A friend of mine said they only pull a 12' Miller disc behind the 2+2 IH 200+HP. I know a Miller is a totally different animal but still we are talking almost 4xs the tractor to.
 
I have a 6-7ft disc.I also have a real tired H.I pulls it 3rd gear full throttle.Thats all it can do.Can't wait to make some $$$ so I can rebuild it and then see what it does!!! kevin :shock: :shock:
 
Back
Top